Enviar artigo por via de e-mail Effect of Production Process on Microstructure and Mechanical Properties of Copper Coatings of Jet Charges
- Autores: Gleener R.E.1, Cheerova M.N.1, Shadiev B.S.2, Katyukhin E.B.2
-
Afiliações:
- R. E. Alekseev Nizhegorodsky Engineering University
- Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
- Edição: Volume 59, Nº 3-4 (2017)
- Páginas: 176-179
- Seção: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235613
- DOI: https://doi.org/10.1007/s11041-017-0124-y
- ID: 235613
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Special features of formation of the grain structure and mechanical properties of copper during recrystallization annealing after cold deformation with a wide range of reduction are studied. The constants of the Hall-Petch equation are determined for copper, the microstructure of which forms in the course of plastic deformation and subsequent heat treatment. The results of the study are allowed for in the process of production of claddings for jet charges.
Sobre autores
R. Gleener
R. E. Alekseev Nizhegorodsky Engineering University
Autor responsável pela correspondência
Email: gleen1@yandex.ru
Rússia, Nizhny Novgorod
M. Cheerova
R. E. Alekseev Nizhegorodsky Engineering University
Email: gleen1@yandex.ru
Rússia, Nizhny Novgorod
B. Shadiev
Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
Email: gleen1@yandex.ru
Rússia, Sarov
E. Katyukhin
Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
Email: gleen1@yandex.ru
Rússia, Sarov
Arquivos suplementares
