Email this article Structural Changes on the Surface of Alloy Ti6Al7Nb Under Gas Nitriding
- Authors: Siyahjani F.1, Atar E.2, Cimenoglu H.1
-
Affiliations:
- Istanbul Technical University, Department of Metallurgical and Materials Engineering
- Gebze Institute of Technology, Department of Materials Science and Engineering
- Issue: Vol 58, No 3-4 (2016)
- Pages: 170-174
- Section: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235444
- DOI: https://doi.org/10.1007/s11041-016-9983-x
- ID: 235444
Cite item
Open Access
Access granted
Subscription Access
Abstract
The structure of titanium alloy Ti6Al7Nb (the surface nitride layer, the intermediate layer and the diffusion layer) is studied after nitriding at 950, 1120 and 1250°C for 12 h at atmospheric nitrogen pressure. The thickness of the nitride and diffusion layers is shown to increase with increase in the nitriding temperature. The growth of the nitride layer is accompanied by segregation of aluminum in the intermediate layer.
About the authors
F. Siyahjani
Istanbul Technical University, Department of Metallurgical and Materials Engineering
Email: cimenogluh@itu.edu.tr
Turkey, Maslak-Istanbul
E. Atar
Gebze Institute of Technology, Department of Materials Science and Engineering
Email: cimenogluh@itu.edu.tr
Turkey, Gebze-Kocaeli
H. Cimenoglu
Istanbul Technical University, Department of Metallurgical and Materials Engineering
Author for correspondence.
Email: cimenogluh@itu.edu.tr
Turkey, Maslak-Istanbul
Supplementary files
