Email this article Effect of Rolling on High-Cycle Fatigue and Fracture of an Al – Mg – Sc Alloy
- Authors: Zhemchuzhnikova D.A.1, Petrov A.P.2, Eremeev N.V.2, Eremeev V.V.2, Kaibyshev R.O.1
-
Affiliations:
- Belgorod State National Research University
- K. É. Tsiolkovsky Russian State University of Technology (MATI)
- Issue: Vol 58, No 3-4 (2016)
- Pages: 142-146
- Section: Aluminum Alloys
- URL: https://journals.rcsi.science/0026-0673/article/view/235429
- DOI: https://doi.org/10.1007/s11041-016-9978-7
- ID: 235429
Cite item
Open Access
Access granted
Subscription Access
Abstract
The tensile strength and fatigue properties of alloy 1575 of the Al – Mg – Sc system are studied after hot deformation (at 360°C) and subsequent cold rolling with different reduction ratios. The effect of the deformed structure on the properties and mechanisms of fracture of the alloy under cyclic tests is determined.
About the authors
D. A. Zhemchuzhnikova
Belgorod State National Research University
Author for correspondence.
Email: labomd@mail.ru
Russian Federation, Belgorod
A. P. Petrov
K. É. Tsiolkovsky Russian State University of Technology (MATI)
Email: labomd@mail.ru
Russian Federation, Moscow
N. V. Eremeev
K. É. Tsiolkovsky Russian State University of Technology (MATI)
Email: labomd@mail.ru
Russian Federation, Moscow
V. V. Eremeev
K. É. Tsiolkovsky Russian State University of Technology (MATI)
Email: labomd@mail.ru
Russian Federation, Moscow
R. O. Kaibyshev
Belgorod State National Research University
Email: labomd@mail.ru
Russian Federation, Belgorod
Supplementary files
