High-Voltage ZnO-Based Ceramics with a Leakage Current Density below 1 μA/cm2


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

This paper presents a study aimed at determining the weight ratio of oxide additives for obtaining high-voltage ceramics in the ZnO–Bi2O3–Sb2O3–Al2O3–Co3O4 system containing 90 wt % ZnO, with a leakage current density under 1 μA/cm2. The ceramic containing the oxide additives in the ratio Bi2O3 : Sb2O3 : Al2O3 : Co3O4 = 0.25 : 0.17 : 1.4 : 1.4 has a nonlinearity coefficient as high as α = 69, a leakage current density as low as Il = 0.4 μA/cm2, and a breakdown voltage Vb = 4.1 kV/mm.

About the authors

E. L. Tikhomirova

Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials, Kola Scientific Center,
Russian Academy of Sciences

Author for correspondence.
Email: tikhomirova@chemy.kolasc.net.ru
Russian Federation, Akademgorodok 26a, Apatity, Murmansk oblast, 184209

Yu. A. Savel’ev

Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials, Kola Scientific Center,
Russian Academy of Sciences

Email: tikhomirova@chemy.kolasc.net.ru
Russian Federation, Akademgorodok 26a, Apatity, Murmansk oblast, 184209

O. G. Gromov

Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials, Kola Scientific Center,
Russian Academy of Sciences

Email: tikhomirova@chemy.kolasc.net.ru
Russian Federation, Akademgorodok 26a, Apatity, Murmansk oblast, 184209

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2019 Pleiades Publishing, Inc.