High-Voltage ZnO-Based Ceramics with a Leakage Current Density below 1 μA/cm2


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

This paper presents a study aimed at determining the weight ratio of oxide additives for obtaining high-voltage ceramics in the ZnO–Bi2O3–Sb2O3–Al2O3–Co3O4 system containing 90 wt % ZnO, with a leakage current density under 1 μA/cm2. The ceramic containing the oxide additives in the ratio Bi2O3 : Sb2O3 : Al2O3 : Co3O4 = 0.25 : 0.17 : 1.4 : 1.4 has a nonlinearity coefficient as high as α = 69, a leakage current density as low as Il = 0.4 μA/cm2, and a breakdown voltage Vb = 4.1 kV/mm.

Sobre autores

E. Tikhomirova

Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials, Kola Scientific Center,
Russian Academy of Sciences

Autor responsável pela correspondência
Email: tikhomirova@chemy.kolasc.net.ru
Rússia, Akademgorodok 26a, Apatity, Murmansk oblast, 184209

Yu. Savel’ev

Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials, Kola Scientific Center,
Russian Academy of Sciences

Email: tikhomirova@chemy.kolasc.net.ru
Rússia, Akademgorodok 26a, Apatity, Murmansk oblast, 184209

O. Gromov

Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials, Kola Scientific Center,
Russian Academy of Sciences

Email: tikhomirova@chemy.kolasc.net.ru
Rússia, Akademgorodok 26a, Apatity, Murmansk oblast, 184209

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Inc., 2019