Поиск

Выпуск
Название
Авторы
Том 55, № 5-6 (2019)
Novel Construction of Liquid Ring Vacuum Pumps
Rodionov Y., Selivanov Y., Nikitin D., Sychev M., Kombarova P.
PDF
(Eng)
Том 54, № 1-2 (2018)
Analysis of the Effect of the Ratio of Discharge Pressure to Suction Pressure on the Characteristics of a Piston Hybrid Power Machine with Gas Suction Capacity
Grigor’ev A., Trukhanova D., Shcherba V., Shcherbakov V., Galdin N.
PDF
(Eng)
Том 53, № 1-2 (2017)
Numerical Approach to the Assessment of Air Pollution by Solid-Fuel Combustion Products
Gvozdyakov D., Gubin V.
PDF
(Eng)
Том 55, № 5-6 (2019)
Thermodynamic Foundations of Working Processes in Positive-Displacement Machines Designed for Compression of Two-Phase, Two-Component Working Fluids
Shcherba V., Shalai V., Zanin A.
PDF
(Eng)
Том 54, № 1-2 (2018)
On the Efficiency of Heat and Electric Power Plants Based on Combined-Cycle Plants with Overexpansion of the Working Fluid in the Gas Turbine and Injection of Steam into the Gas Path
Shaposhnikov V., Biryukov B.
PDF
(Eng)
Том 51, № 9-10 (2016)
Theorem of Ideal Cycles of Refrigerating Machines
Kolosov M.
PDF
(Eng)
Том 54, № 7-8 (2018)
An Analysis of the Influence of the Angular Spin Rate of the Crankshaft of a Hybrid Piston Power Machine with Stepped Slot Seal on the Working Processes and Operational Characteristics Based on the Results of Theoretical and Experimental Studies
Shcherba V., Shalai V., Grigor’ev A., Kondyurin A., Nesterenko G., Bazhenov A.
PDF
(Eng)
Том 54, № 1-2 (2018)
Anthropogenic Emissions from Combustion of Coal-Water Slurries Containing Petrochemicals Based on Coal and Oil Processing Wastes
Dmitrienko M., Kosintsev A., Nyashina G., Lyrshchikov S.
PDF
(Eng)
Том 54, № 5-6 (2018)
Analysis of the Influence of Volumes of Receivers and Diameters of Connecting Fluid Pipelines on Piston Hybrid Power Machine Working Processes Based on Use of Gas Pressure Fluctuations in Discharge Line
Shcherba V., Blinov V., Paramonov A., Rybak A., Grigor’ev A., Lobov I.
PDF
(Eng)
Том 53, № 9-10 (2018)
Multi-Model Interval Estimators of the Strength State of Structurally Complex Load-Bearing Units of Production Equipment
Doronin S., Reizmunt E.
PDF
(Eng)
Том 54, № 3-4 (2018)
Analysis of the Influence of the Length and Diameter of a Connecting Gas Pipeline on the Working Processes of a Hybrid Piston Power Machine Based on Application of Fluctuations in Gas Pressure in the Injection Lines
Shcherba V., Blinov V., Paramonov A., Grigor’ev A., Lobov I.
PDF
(Eng)
Том 53, № 5-6 (2017)
Optimization of Flow Passage of Centrifugal Fan of Grinding-Separating Unit
Dorogokupets A., Frantskevich V.
PDF
(Eng)
Том 54, № 3-4 (2018)
Losses of Power in Thermal Engines in Nonequilibrium Regenerative Heat Exchange
Kolosov M., Borisenko A., Manylov V., Valyakina A.
PDF
(Eng)
Том 53, № 5-6 (2017)
Influence of Angle of Slope of Blades on Operation of Centrifugal Turbine
Pavlechko V.
PDF
(Eng)
Том 55, № 7-8 (2019)
Calculation of Compression and Discharge Processes in a Two-Stage Hybrid Piston Power Machine with Liquid Piston
Shcherba V., Zanin A., Nosov E., Paramonov A., Blinov V.
PDF
(Eng)
Том 54, № 3-4 (2018)
Analysis of Crankshaft Angular Rotation Speed on Characteristics of Piston Hybrid Power Machine with a Gas Volume at Suction
Shcherba V., Shcherbakov V., Galdin N., Vedruchenko V., Grigor’ev A., Trukhanova D.
PDF
(Eng)
Том 53, № 3-4 (2017)
Modeling of a Double-Pipe Enclosed Heat Exchanger with Temperature Jumps of Heat Carriers at the Heat-Exchanger Inlet
Golovanchikov A., Vorontsova S.
PDF
(Eng)
Том 55, № 7-8 (2019)
Thermophysical Validation of the Technology of Asphalt-Resin-Paraffin Deposit Removal from Well Casings in Continuous High-Viscosity Oil Production Conditions
Dmitriev M., Ponomarenko A., Klachkov A.
PDF
(Eng)
Том 54, № 3-4 (2018)
Investigation of Power Consumption in a Mixing Device with Swinging Movement of the Actuating Element
Prikhod’ko A., Smelyagin A.
PDF
(Eng)
Том 53, № 3-4 (2017)
Development of Hybrid Equipment for Well Drilling and Hydrocarbon Production from Offshore Deposits
Sazonov Y., Mokhov M.
PDF
(Eng)
1 - 20 из 20 результатов
Подсказки:
  • Ключевые слова чувствительны к регистру
  • Английские предлоги и союзы игнорируются
  • По умолчанию поиск проводится по всем ключевым словам (агенс AND экспериенцер)
  • Используйте OR для поиска того или иного термина, напр. образование OR обучение
  • Используйте скобки для создания сложных фраз, напр. архив ((журналов OR конференций) NOT диссертаций)
  • Для поиска точной фразы используйте кавычки, напр. "научные исследования"
  • Исключайте слово при помощи знака - (дефис) или оператора NOT; напр. конкурс -красоты или же конкурс NOT красоты
  • Используйте * в качестве версификатора, напр. научн* охватит слова "научный", "научные" и т.д.

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах