Automation of extrusion of porous cable products based on a digital controller
- Autores: Chostkovskii B.K.1, Mitroshin V.N.1
-
Afiliações:
- Samara State Technical University
- Edição: Volume 53, Nº 4 (2017)
- Páginas: 371-378
- Seção: Automation Systems in Scientific Research and Industry
- URL: https://journals.rcsi.science/8756-6990/article/view/212189
- DOI: https://doi.org/10.3103/S8756699017040094
- ID: 212189
Citar
Resumo
This paper presents a new approach to designing an automated system for monitoring and controlling the process of applying porous insulation material on a conductive cable core, which is based on using structurally and parametrically optimized digital controllers of an arbitrary order instead of calculating typical PID controllers using known methods. The digital controller is clocked by signals from the clock length sensor of a measuring wheel, instead of a timer signal, and this provides the robust properties of the system with respect to the changing insulation speed. Digital controller parameters are tuned to provide the operating parameters of the manufactured cable using a simulation model of stochastic extrusion and are minimized by moving a regular simplex in the parameter space of the tuned controller.
Palavras-chave
Sobre autores
B. Chostkovskii
Samara State Technical University
Email: vmitroshin@mail.ru
Rússia, ul. Molodogvardeiskaya 244, Samara, 443100
V. Mitroshin
Samara State Technical University
Autor responsável pela correspondência
Email: vmitroshin@mail.ru
Rússia, ul. Molodogvardeiskaya 244, Samara, 443100
Arquivos suplementares
