Usage of different planting schemes for mini-tubers potato growing under North Ossetia-Alania republic conditions

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The purpose of the research is to study the effect of different planting schemes of the base lines on the quantitative yield of mini-tubers in the conditions of Republic of North Ossetia-Alania. The object of the research was microplants and microtubers of new promising potato varieties Gulliver, Sadon and Varyag. The experiments were carried out in 2020-2022, laid on a peat substrate using planting patterns 25x25 cm in plastic pots, 25x30 and 25x15 cm in the ground. Growing mini-tubers according to the scheme 25x25 cm in pots contributed to the formation of from 139.4 to 155.5 pcs/m2 with a standard seed fraction yield of 88-94%. An increase in the nutrition area as a result of planting the base lines into the soil according to the 25x30 cm scheme reduced the number of formed mini-tubers by 19.4-49,0 pcs/m2 with a standard yield of 77-85%. According to the 25x15 cm scheme, the total yield of mini-tubers increased by 19-35 pieces/m2, but the yield of the standard fraction decreased to 57-74%. In the original seed production of potatoes, an important indicator in the cultivation of mini-tubers is the yield of a fraction of more than 20 mm in transverse diameter. The maximum yield of mini-tubers with such dimensional characteristics was noted when planting micro-plants according to the scheme 25x25 cm - 113.7 pcs/m2. The use of micro-tubers according to this scheme reduced the number of mini-tubers with a fraction of more than 20 mm to 91.7 pcs/m2 or by 19%. As a result of applying the schemes of 25x30 and 25x15 cm, the quantitative yield of mini-tubers with a fraction of more than 20 mm did not depend on the origin of the base lines and amounted to 58.5-65.6 pcs/m2. Based on the studied planting schemes in protected ground in the Republic of North Ossetia-Alania, the maximum yield of mini-tubers with the best dimensional characteristics was obtained as a result of planting the base lines according to the 25x25 cm scheme in plastic pots. Reducing the feeding area according to the 25x15 cm scheme reduced the yield of mini-tubers of a fraction of more than 20 mm by 1.8-1.9 times.

Sobre autores

E. Oves

Russian Potato Research Centre

Email: oveselena@mail.ru

I. Kardanova

Russian Potato Research Centre

K. Etdzaeva

Russian Potato Research Centre

N. Gaitova

Russian Potato Research Centre

Bibliografia

  1. Молявко А.А. Марухленко А.В., Борисова Н.П. Урожайность и выход стандартной фракции мини-клубней картофеля при внесении хелатных удобрений на питательном грунте Агробалт-Н под тоннельными укрытиями // Аграрная наука. 2022. № 6. С. 86-91.
  2. Хутинаев О.С., Старовойтов В.И., Старовойтова О.А. и др. Выращивание мини-клубней картофеля и топинамбура в условиях водно-воздушной культуры с использованием искусственного освещения // Вестник Московского государственного агроинженерного университета имени В.П. Горячкина. 2018. №4(86). С. 7-14.
  3. Anisimov B., Simakov E., Mityushkin A. et al. Potato Seed Production in Russia // Potato Journal. 2018. Vol. 45. No.2. P. 152-158.
  4. Awati R., Bhattacharya A., Char B. Rapid Multiplication Technique for Production of High -Quality Seed Potato (Solanum tuberosum L.) Tubers // Journal of Applied Biology & Biotechnology. 2019. Vol. 7(01), PP. 001-005/ doi: 10.7324/JABB.2019.70101
  5. Dimante I., Gaile Z. The effect of planting density on potato (Solanum tuberosum L.) Minituber number, weight and multiplication rate. Research for rural // Research for rural development 2016. Vol. 1. Р. 27-33.
  6. Dimante I., Mežaka I., Gaile Z. The effect of minituber weight on their field performance under a Northern European environment. Agronomy Research. 2019.17(2): 396-407. doi: 10.15159/AR.19.063
  7. Fouad M., Genesia F., El-Hamed A., Basma A. El-Safty Influence of Plant Density and Genotype on Potato Minituber Production from Microshoots and Microtubers // International Journal on Environmental Sciences. 2018. Vol. 17. Iss.1. P. 77 - 84.
  8. Jin H., Liu J., Song B, Xie C. Impact of Plant Density on the Formation of Potato Mimitubers Derived from Microtubers and Tip-Cuttings in Plastic Houses // Journal of Integrative Agriculture. 2013. Vol. 12(6): 1008-1017. doi: 10.1016/S2095-3119(13)60321-4.
  9. Ozkaynak E. Tuber size effects on yield and number of potato minitubers of commercial varieties in a greenhouse production system // Turkish Journal of Field Crops. 2021. Vol. 26, Issue: 1. PP: 122 - 127. doi: 10.17557/tjfc.950280.
  10. Ozturk G., Yildirim Z. Tuber characteristics of disease free meristem clones of some potato genotypes // Turkish Journal of Field Crops. 2020. 25: 174-180.
  11. Sadawarti M.J., Samadhiya R.K., Kumar V. et al. Hi-tech planting materials performance under in vivo conditions for potato breeder seed production // International Journal of Chemical Studies. 2018. 6(3):817-822.
  12. Zeyruk V.N., Vasilieva S.V., Belov G.L. et al А boost to integrated management of certain potato diseases using metal nanoparticles // Potato Research. 2022. V. 65.2. PP: 273-288.

Declaração de direitos autorais © Russian Academy of Sciences, 2023

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies