Computer-Aided Design of Process of Fabrication on Steel of Solid Lubricating Coating Based on Bank Sand
- 作者: Shmatov A.1, Solomyanskii A.2, Kolbasenko O.1
-
隶属关系:
- Belarusian National Technical University
- Institute of Chemistry of New Materials, National Academy of Sciences of Belarus
- 期: 卷 10, 编号 1 (2019)
- 页面: 81-88
- 栏目: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/207765
- DOI: https://doi.org/10.1134/S2075113319010295
- ID: 207765
如何引用文章
详细
The results of investigation of tribological properties of solid lubricating coatings fabricated on high carbon steel of U8 grade (0.8% of C) using thermo-hydro-chemical treatment (THCT) in an aqueous-dispersion medium based on bank sand are presented. The composition of the medium and the temperature and the time parameters of THCT process were optimized by the friction coefficient of solid lubricating coatings. The diagrams of “parameters of process–property” were constructed using mathematical models. Processing by optimal THCT regime of U8 steel in hydrosol medium of bank sand makes it possible under the condition of lubrication absence to decrease the friction coefficient of steel surface by 5.4 times as compared with rough-sawed surface.
作者简介
A. Shmatov
Belarusian National Technical University
编辑信件的主要联系方式.
Email: shmatovalexander@gmail.com
白俄罗斯, Minsk, 220013
A. Solomyanskii
Institute of Chemistry of New Materials, National Academy of Sciences of Belarus
Email: shmatovalexander@gmail.com
白俄罗斯, Minsk, 220141
O. Kolbasenko
Belarusian National Technical University
Email: shmatovalexander@gmail.com
白俄罗斯, Minsk, 220013