Отправить статью по E-mail Investigation of the Thermomechanical Characteristics of Feedstocks with Different Binder Types
- Авторы: Muranov A.1, Semenov A.1, Marakhovskii P.2, Chutskova E.2, Semenov B.1
-
Учреждения:
- Bauman Moscow State Technical University (National Research University)
- All-Russian Scientific Research Institute of Aviation Materials (VIAM), State Scientific Center of the Russian Federation
- Выпуск: Том 10, № 4 (2019)
- Страницы: 959-965
- Раздел: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/208033
- DOI: https://doi.org/10.1134/S2075113319040269
- ID: 208033
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
A description is given of mass production technology for metal small-sized precision parts with a complicated configuration—the injection molding of polymer–powder mixtures under high pressure. For polymer–powder mixtures with the most common types of polymeric binders, the effect of the binder composition exerted on the thermomechanical characteristics is studied, on the basis of which a comparative assessment of the manufacturability of the mixtures under molding is presented.
Об авторах
A. Muranov
Bauman Moscow State Technical University (National Research University)
Автор, ответственный за переписку.
Email: MuranovAlecs@mail.ru
Россия, Moscow, 105005
A. Semenov
Bauman Moscow State Technical University (National Research University)
Email: MuranovAlecs@mail.ru
Россия, Moscow, 105005
P. Marakhovskii
All-Russian Scientific Research Institute of Aviation Materials (VIAM), State Scientific Center of the Russian Federation
Email: MuranovAlecs@mail.ru
Россия, Moscow, 105005
E. Chutskova
All-Russian Scientific Research Institute of Aviation Materials (VIAM), State Scientific Center of the Russian Federation
Email: MuranovAlecs@mail.ru
Россия, Moscow, 105005
B. Semenov
Bauman Moscow State Technical University (National Research University)
Email: MuranovAlecs@mail.ru
Россия, Moscow, 105005
