Мақаланы E-mail арқылы жіберу Investigation of the Thermomechanical Characteristics of Feedstocks with Different Binder Types
- Авторлар: Muranov A.1, Semenov A.1, Marakhovskii P.2, Chutskova E.2, Semenov B.1
-
Мекемелер:
- Bauman Moscow State Technical University (National Research University)
- All-Russian Scientific Research Institute of Aviation Materials (VIAM), State Scientific Center of the Russian Federation
- Шығарылым: Том 10, № 4 (2019)
- Беттер: 959-965
- Бөлім: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/208033
- DOI: https://doi.org/10.1134/S2075113319040269
- ID: 208033
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
A description is given of mass production technology for metal small-sized precision parts with a complicated configuration—the injection molding of polymer–powder mixtures under high pressure. For polymer–powder mixtures with the most common types of polymeric binders, the effect of the binder composition exerted on the thermomechanical characteristics is studied, on the basis of which a comparative assessment of the manufacturability of the mixtures under molding is presented.
Авторлар туралы
A. Muranov
Bauman Moscow State Technical University (National Research University)
Хат алмасуға жауапты Автор.
Email: MuranovAlecs@mail.ru
Ресей, Moscow, 105005
A. Semenov
Bauman Moscow State Technical University (National Research University)
Email: MuranovAlecs@mail.ru
Ресей, Moscow, 105005
P. Marakhovskii
All-Russian Scientific Research Institute of Aviation Materials (VIAM), State Scientific Center of the Russian Federation
Email: MuranovAlecs@mail.ru
Ресей, Moscow, 105005
E. Chutskova
All-Russian Scientific Research Institute of Aviation Materials (VIAM), State Scientific Center of the Russian Federation
Email: MuranovAlecs@mail.ru
Ресей, Moscow, 105005
B. Semenov
Bauman Moscow State Technical University (National Research University)
Email: MuranovAlecs@mail.ru
Ресей, Moscow, 105005
