Enhancement of mechanical and tribotechnical properties of structural steel by electrical discharge machining


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

A thermodynamic model of an open system of alloying electrode–workpiece is proposed. Results of investigation on the influence of the material of alloying electrodes and machining conditions on the phase composition, topography, and mechanical and tribotechnical properties of processing surfaces are considered.

Sobre autores

Yu. Mashkov

Omsk State Technical University

Autor responsável pela correspondência
Email: malij_olga@mail.ru
Rússia, pr. Mira 11, Omsk, 644050

M. Baybaratskaya

Omsk Autoarmoured Engineering Institute

Email: malij_olga@mail.ru
Rússia, 14 military town, Omsk, 644098

B. Alimbayeva

Omsk Autoarmoured Engineering Institute

Email: malij_olga@mail.ru
Rússia, 14 military town, Omsk, 644098

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2016