Enviar artigo por via de e-mail Some Aspects of Studying the Corrosion Processes in 25Kh1MF Steel Fasteners after Aluminizing
- Autores: Khovratovich I.M.1, Ptashnik A.V.2, Olenin M.I.2, Gorynin V.I.2, Berezhko B.I.2
-
Afiliações:
- AO VMZ Krasny Oktyabr
- National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
- Edição: Volume 9, Nº 6 (2018)
- Páginas: 1182-1187
- Seção: Corrosion and Protection of Metals
- URL: https://journals.rcsi.science/2075-1133/article/view/207737
- DOI: https://doi.org/10.1134/S2075113318060217
- ID: 207737
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Abstract—The resistance to atmospheric corrosion of 25Kh1MF steel after aluminizing and thermal improvement has been studied. It is established that the low resistance of the aluminized layer to atmospheric corrosion is caused by surface defects, such as cracks and the pores, or by the partial removal of the layer containing the Fe3Al intermetallic. In the aluminized layer containing ferrite doped with aluminum, aluminum nitrides that prevent the cold diffusion welding of mating thread surfaces of fasteners are found.
Sobre autores
I. Khovratovich
AO VMZ Krasny Oktyabr
Email: mail@crism.ru
Rússia, Volgograd, 400007
A. Ptashnik
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Rússia, St. Petersburg, 191015
M. Olenin
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Autor responsável pela correspondência
Email: mail@crism.ru
Rússia, St. Petersburg, 191015
V. Gorynin
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Rússia, St. Petersburg, 191015
B. Berezhko
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Rússia, St. Petersburg, 191015
Arquivos suplementares
