Article

标题 文件
卷 9, 编号 4 (2018) Thermal and Electrical Conductivity of Copper-Fluoroplast Composites Produced by Explosive Pressing PDF
(Eng)
Kazurov A., Adamenko N., Pisarev S.
卷 9, 编号 4 (2018) Molding Features of Silicon Carbide Products by the Method of Hot Slip Casting PDF
(Eng)
Frolova M., Leonov A., Kargin Y., Lysenkov A., Titov D., Petrakova N., Perevislov S., Konovalov A., Sevostyanov M., Melnikova I.
卷 9, 编号 4 (2018) The Temperature Effect on Mechanical Properties of Carbon Fiber Reinforced Plastics for Aviation Purposes PDF
(Eng)
Kudrin A., Gabriel’s K., Karaeva O.
卷 9, 编号 4 (2018) Formation of Glaze Coatings of Clinker Bricks Based on Raw Kaolin and Aluminum-Containing Nanotechnogenic Raw Materials PDF
(Eng)
Abdrakhimova E., Abdrakhimov V.
卷 9, 编号 4 (2018) Effect of the Addition of Thermally Activated Heavy Loam to Portland Cement on the Properties of Cement Stone PDF
(Eng)
Rakhimov R., Rakhimova N., Gayfullin A., Morozov V.
卷 9, 编号 4 (2018) Dispersion Interactions as Criterion of Optimization of Cementless Composite Binders PDF
(Eng)
Danilov V., Ayzenshtadt A., Frolova M., Tutygin A.
卷 9, 编号 4 (2018) High-Temperature Filter Based on Silicon Carbide for Aggressive Fluids and Gases PDF
(Eng)
Brantov S., Borisenko D.
卷 9, 编号 4 (2018) Calculation of X-ray Density of Amorphous–Crystalline Polymer Taking into Account Degree of Ordering of Amorphous Phase PDF
(Eng)
Kalistratova L., Mashkov Y., Egorova V.
卷 9, 编号 4 (2018) Effect of Chemical Composition of Shungite Material on Its Sorption Properties PDF
(Eng)
Polunina I., Goncharova I., Polunin K., Buryak A.
卷 9, 编号 4 (2018) Effect of Reaction Sintering Conditions on Properties of Ceramics Based on Alumina Oxynitride PDF
(Eng)
Prosvirnin D., Larionov M., Kolmakov A., Alikhanyan A., Antipov V., Samokhin A., Lysenkov A., Titov D.
卷 9, 编号 4 (2018) Occurrence and Ways of Development of Manufacture of Domestic Hard Alloy Products PDF
(Eng)
Panov V.
卷 9, 编号 4 (2018) Thixotropy Hysteresis and Structure Formation in Elastomeric Suspensions PDF
(Eng)
Nelyub V., Borodulin A., Kobets L., Malysheva G.
卷 9, 编号 4 (2018) X-ray Diffraction Tests of Near-Surface Layer of Copper Treated by Ball Rolling PDF
(Eng)
Kolyvanov E., Afonikova N., Kobelev N.
卷 9, 编号 4 (2018) Grain Structure of Rapidly Solidified Alloy Sn32Bi52Pb16 PDF
(Eng)
Shepelevich V.
卷 9, 编号 4 (2018) The Formation of Carbide Coatings at the Microarc Thermodiffusion Tungstenizing of Steel PDF
(Eng)
Stepanov M., Dombrovskiy Y.
卷 9, 编号 4 (2018) Effect of Microstructural Features of Titanium Alloys on Fatigue Properties and Mechanism of Crack Nucleation in Region of Very High Cycle Fatigue PDF
(Eng)
Nikitin A., Shanyavskii A., Beklemishev N., Porokhov V., Barsegyan O.
卷 9, 编号 4 (2018) Study of Formation of Welded Joint Produced by Laser Overlap Welding of Aluminum AMg2M Alloy and St3 Steel PDF
(Eng)
Lyukhter A., Shlegel A., Gusev D., Samarin S.
卷 9, 编号 4 (2018) Structure and Strength of the ZhS32-VI Heat-Resistant Nickel Alloy Produced by the Method of Selective Laser Alloying on a Single-Crystal Substrate PDF
(Eng)
Petrushin N., Evgenov A., Zavodov A., Treninkov I.
卷 9, 编号 4 (2018) Antifriction Properties of Plasma-Chemical Coatings Based on SiO2 with MoS2 Nanoparticles under Conditions of Spinning Friction on ShKh15 Steel PDF
(Eng)
Breki A., Aleksandrov S., Tyurikov K., Kolmakov A., Gvozdev A., Kalinin A.
卷 9, 编号 4 (2018) Formation of Coatings Based on Copper Aluminides on Aluminum Surface by Contact Melting PDF
(Eng)
Shmorgun V., Slautin O., Kulevich V.
卷 9, 编号 4 (2018) Polymers and Composites Produced from Epoxy Resins Cured with 3,5-Diethyltoluenediamine: Synthesis and Properties PDF
(Eng)
Fedoseev M., Derzhavinskaya L., Antipin V., Tsvetkov R.
卷 9, 编号 1 (2018) On the Problem of Roadmapping of Domestic Arctic Materials Science: Part II PDF
(Eng)
Buznik V., Burkovskaya N., Zibareva I., Cherepanin R.
卷 9, 编号 1 (2018) Gold Nanoparticles: Synthesis, Optical Properties, and Application PDF
(Eng)
Ogarev V., Rudoi V., Dement’eva O.
卷 9, 编号 1 (2018) Mechanical Properties of Composite Materials Based on Latex-Impregnated Needle-Punched Nonwoven Fabrics from Fibers of Different Nature PDF
(Eng)
Dedov A., Nazarov V.
卷 9, 编号 1 (2018) Improvement of Structure and Properties of Scintillation Composites by Centrifugation PDF
(Eng)
Klassen N., Pokidov A., Kedrov V.
101 - 125 的 263 信息 << < 1 2 3 4 5 6 7 8 9 10 > >>