Cutting quality and accuracy parameters of billet at the cutting process in the dies by rotary tool
- 作者: Kokorin V.1, Filimonov V.1, Zemskova A.1
-
隶属关系:
- PC «Ulyanovsk Research Institute of Aviation Technology and Production Organization»
- 期: 卷 7, 编号 2-2 (2013)
- 页面: 276-278
- 栏目: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/68316
- DOI: https://doi.org/10.17816/2074-0530-68316
- ID: 68316
如何引用文章
全文:
详细
Article considers the most common types of cutting of roll-formed profiles, cutting dies and cutting metal using slitting saw. It describes executed experience and the influence of cuts type on the quality. The paper shows the advantages and disadvantages of cutting methods and also gives general recommendations.
作者简介
V. Kokorin
PC «Ulyanovsk Research Institute of Aviation Technology and Production Organization»
Email: omd@ulstu.ru. fwiumz@mail.ru. zemskova.a@gmail.com
Ph.D., Prof.; 8(8422) 41-78-88
V. Filimonov
PC «Ulyanovsk Research Institute of Aviation Technology and Production Organization»
Email: omd@ulstu.ru. fwiumz@mail.ru. zemskova.a@gmail.com
Ph.D., Prof.; 8(8422) 41-78-88
A. Zemskova
PC «Ulyanovsk Research Institute of Aviation Technology and Production Organization»
Email: omd@ulstu.ru. fwiumz@mail.ru. zemskova.a@gmail.com
8(8422) 41-78-88
参考
- Филимонов С.В. Интенсивное формообразование гнутых профилей./ С.В. Филимонов, В.И. Филимонов. - Ульяновск: изд-во УлГТУ,2008.- 444с.
- Веселовский С.И. Разрезка материалов/ С.И. Веселовский. – М.: Машиностроение,1973.-360 с.
- Roll Forming Handbook / Edited by J.T. Halmos. – Boca Raton: CRC Group, 2006. – 583 р.
- Диамантопуло К.К. Прогрессивная технология разделки исходных материалов в кузнечно-штамповочном производстве/ К.К. Диамантопуло, А.П. Атрощенко.- Мариуполь,1992.- 60с.
- Справочник конструктора-инструментальщика: под общ. ред. В.И. Баранчикова.- М.: Машиностроение,1994. - 560с.