Influence of friction in joints on the performance of tensioning device of continuous track



如何引用文章

全文:

详细

In the article there is proposed a method of calculation of the friction work in joints of a tensioning device with the determination of average pressure and contact area of the surface of joints taking into account design features of the joint and features of its manufacturing. The influence of the coefficient of friction, type of lubricant and temperature on the value of the friction work is analyzed. The obtained data were compared with the value of work of an elastic member to evaluate the influence of friction on the efficiency of a tensioning device.

作者简介

S. Bulbutenko

Moscow State University of mechanical Engineering (MAMI); JSC “Scientific and research institute of steel”

Email: bulbutenko@engineer.com
+7-963-976-29-47

R. Fedotkin

Moscow State University of mechanical Engineering (MAMI); JSC “Scientific and research institute of steel”

+7-963-976-29-47

A. Ovcharenko

Moscow State University of mechanical Engineering (MAMI); JSC “Scientific and research institute of steel”

+7-963-976-29-47

V. Beynenson

Moscow State University of mechanical Engineering (MAMI); JSC “Scientific and research institute of steel”

Email: bulbutenko@engineer.com
Ph.D.; +7-963-976-29-47

参考

  1. Саркисян Р.Р. Обоснование параметров амортизационно-натяжныых устройств гусеничных движителей тракторов класса 3/ Диссертация. - М., 1987.
  2. Городецкий К.И., Крумбольдт Л.Н., Щельцын Н.А. Конструирование и расчет составных частей объемного гидропривода/ Под общей ред. В.М. Шарипова. - М.: МАМИ, 1994, - 139 с.
  3. Трение, изнашивание и смазка. Справочник. В 2-х кн. Кн. 2/ Под общ. ред. И.В. Карельского и В.В. Алисина. - М.: Машиностроение, 1979. - 358 с.
  4. Шарипов В.М. Конструирование и расчет тракторов. М.: Машиностроение, 2009, - 752 с.
  5. Платонов В.Ф. Динамика и надежность гусеничного движителя. - М.: Машиностроение, 1973. -232 с.
  6. Гаркунов Д. Н. Триботехника. - М.: Издательство «МСХА», 2002. - 616 с.
  7. Мур Д. Основы и применения трибологии. - М.Машиностроение, 1978. - 483 с.
  8. Ваванов В.В., Вайншток В.В., Гуреев Д.Д. Автомобильные пластичные смазки. - М.: Транспорт. 1986. - 14 5с.

补充文件

附件文件
动作
1. JATS XML

版权所有 © Bulbutenko S.S., Fedotkin R.S., Ovcharenko A.S., Beynenson V.D., 2013

Creative Commons License
此作品已接受知识共享署名-非商业性使用-禁止演绎 4.0国际许可协议的许可。

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).