Comparative analysis of methods for cutting process calculating (to development of analytical method for cutting processes calculating)
- Authors: Maksimov YV1, Olenin LD1, Shaparovskaya MA1
-
Affiliations:
- Moscow State Technical University MAMI
- Issue: Vol 5, No 1 (2011)
- Pages: 159-169
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/69937
- DOI: https://doi.org/10.17816/2074-0530-69937
- ID: 69937
Cite item
Full Text
Abstract
This article presents the comparative analysis of methods for cutting process calculating. The known solutions and methods of calculations a chip formation are considered, on their basis comparative calculations of the cutting force are made. It is noticed that the greatest capacity decisions based on the energy method of the analysis using the extreme positions of deformation mechanics. By this method L. D. Olenin analyzed the most general case of cutting, namely the oblique cutting by the tool with a blunt cutting edge, the physical equations for calculation of all major process parameters are received. The decision considers strain hardening material, the real value of contact friction, and also the power spent on the plastic fracture associated with the formation of new surfaces. It is emphasized that all equations are physical. It allows to recommend them as a basis for developing methods for calculating the cutting processes by the tool with any shape and geometry of a cutting part.
About the authors
Y V Maksimov
Moscow State Technical University MAMIд.т.н. проф(495) 223-05-23 доб. 1327; МГТУ МАМИ; Moscow State Technical University MAMI
L D Olenin
Moscow State Technical University MAMIд.т.н. проф(495) 223-05-23 доб. 1327; МГТУ МАМИ; Moscow State Technical University MAMI
M A Shaparovskaya
Moscow State Technical University MAMI(495) 223-05-23 доб. 1327; МГТУ МАМИ; Moscow State Technical University MAMI
References
- Брикс А. Резание металлов. (Строгание), 1896
- Васин С.А., Верещака А.С., Кушнер В.С. Резание материалов: термомеханический подход к системе взаимосвязей при резании: Учеб. для тех. вузов. - М.: Изд-во МГТУ им. Н.Э. Баумана, 2001. - 448 с.: ил.
- Воронцов А.Л., Султан-Заде Н.М., Албагачиев А.Ю. Вестник машиностроения. 2008. № 1-12.
- Внуков Ю.Н., Саржинская А.Г. Методика теоретического определения составляющих силы резания при токарной обработке. 2008
- Грановский Г.И., Грановский В.Г. Резание металлов. М.: «Высшая школа», 1985. - 304 с.
- Зворыкин К.А. Работа и усилие, необходимые для отделения металлической стружки. - М.: Русская типо-литография, 1893г. - 76 с.
- Зорев Н.Н. Вопросы механики процесса резания металлов. М.: Машгиз, 1956. - 363 с.
- Клушин М.И. Иследования процесса резания металлов. М.: Машгиз, 1949. -165 с.
- Кривоухов В.А. Деформирование поверхностных слоев металла в процессе резания. М.:Машгиз, 1945.
- Куфарев Г.Л. Экспериментальное изучение пластической деформации при резании материалов. Известия вузов СССР. Машиностроение. 1959. № 7.
- Оленин Л.Д. О контактных напряжениях при внедрении плоского и скругленного пуансонов в полупространство. Материалы Международного научного симпозиума. М.: МГТУ МАМИ 2005. с.
- Оленин Л.Д.. К анализу механики резания упрочняемого материала. Стружко-образование. Известия МГТУ «МАМИ» №1 2008. с. 183..190.
- Оленин Л.Д.. К анализу механики резания. Резание инструментом с притупленной режущей кромкой. Известия МГТУ «МАМИ» № 2009. с. 1.1.
- Розенберг А.М., Еремин А.Н. Элементы теории процесса резания металлов. - М. - Свердловск.: Машгиз, 1956. - 319 с.
- Розенберг Ю.А., Тахман С.И. Силы резания и методы и определения : Учебное пособие: В 2 ч. - Курган : Изд-во КМИ, 1995. - 130 с. и 103 с.
- Тиме И.А. Сопротивление металлов и дерева резанию. - С.-Петербург, 1870.
- Astakhov V.P., Shvets S. The assessment of plastic deformation in metal cutting. Journal of Materials Processing Technology. 146 (2004). 193-202
- Cook N.H., Shaw M.C. Visual Metal Cutting Study, Mechanical Engineering, №11, vol.73, 1951
- Lee E.H., Shaffer B.W. The theory of plasticity applied to a problem of machining. Journal of Applied Mechanics, No. 4, vol. 18, 1951, S. 405-413
- Oxley P.L.B. Mechanics of Machining, an analytical approach to assessing machinability. Chichester: Ellis Horwood, 1989, 242 p.
- Palmer W.B., Oxley P.L.B. Mechanics of metal cutting. Proc. Inst. Mech. Eng. 173. 623-654.
- Oxley P.L.B. Mechanics of Machining, an analytical approach to assessing machinability. Chichester: Ellis Horwood, 1989, 242 p.
- Shaw M., Cook N., Finnie J. Transactions of the ASME. vol.75, pp 273-288, 1963.