Developing of analytical model for bevel cutting
- Authors: Olenin L.D1, Storchak M.G2, Lekveischvili M.A1
-
Affiliations:
- 1Moscow State University of Mechanical Engineering (MAMI)
- 2Institute for Machine Tools of University of Stuttgart, Germany
- Issue: Vol 8, No 1-2 (2014)
- Pages: 123-128
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/67804
- DOI: https://doi.org/10.17816/2074-0530-67804
- ID: 67804
Cite item
Full Text
Abstract
The work presents the results of the analysis of the bevel cutting as sufficiently general case of the cutting process. The analysis is made by power method with the use of extreme provisions of continuum mechanics. The cutting process is considered as the aggregate of two simultaneously occurring acts - chip formation and continuous formation of new surfaces. There are two such surfaces: the processed surface of a workpiece and the outer surface of the chip. In addition, this work contains the results of comparative calculations of cutting force made by the method of finite elements in the DEFORM-3D and results of experimental studies conducted in laboratory conditions.
Full Text
##article.viewOnOriginalSite##About the authors
L. D Olenin
1Moscow State University of Mechanical Engineering (MAMI)
Email: olenin@mail.ru
Dr. Eng.
M. G Storchak
2Institute for Machine Tools of University of Stuttgart, Germany
Email: michael.storchak@ifw.uni-stuttgart.de
Dr. Eng.; +49 (0) 71168583831
M. A Lekveischvili
1Moscow State University of Mechanical Engineering (MAMI)
References
- К анализу механики резания упрочняемого материала. Стружкообразование / Оленин Л.Д.: Известия МГТУ «МАМИ», 2008. №1 (2) - c. 183-190.
- К анализу механики резания цилиндрическим сверлом с перемычкой / Оленин Л.Д.: Известия МГТУ «МАМИ», 2011, № 2 (12) - с. 180-188.
- О контактных напряжениях при внедрении плоского и скругленного пуансонов в полупространство / Оленин Л.Д.: Материалы Международного научного симпозиума. М.: МГТУ МАМИ, 2005.
- Металловедение: учеб. для вузов. 6-е изд. / Гуляев А.П.: М.: Металлургия, 1986 - с. 544.
- Johnson, G.R., Cook W.H.: A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In Proceedings of the 7th International Symposium on Ballistics, Vol. 547, p. 541 - 547, Den Haag, 1983.