Comparative estimation of influece of factors on accuracy of the hight sizes of forging received on screw and crank presses
- Authors: Vyatkin AG1, Matveev SV1
-
Affiliations:
- Kaluga branch of Bauman MSTU
- Issue: Vol 4, No 2 (2010)
- Pages: 112-117
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/69668
- DOI: https://doi.org/10.17816/2074-0530-69668
- ID: 69668
Cite item
Full Text
Abstract
The article shows that influence of an error of volume of initial preparations and an error of regulation of screw and crank presses make various influence on accuracy of the hight sizes of received forging.
About the authors
A G Vyatkin
Kaluga branch of Bauman MSTU
Email: 8 920 611 31 44
к.т.н. доц; Калужский филиал МГТУ им. Н.Э.Баумана; Kaluga branch of Bauman MSTU
S V Matveev
Kaluga branch of Bauman MSTU
Email: 8 920 611 31 44
Kaluga branch of Bauman MSTU
References
- Кузнечно-штамповочное оборудование: Учебник для машиностроительных вузов / А.Н. Бакетов, Ю.А. Бочаров, Н.С. Добринскии и др.; Под ред. А.Н. Бакетова, Е.Н. Ланского. - 2-е изд., пераб. и доп.- М.; Машиностроение, 1982.- 567с., ил.
- Антонюк Ф.И., Вяткин А.Г. Влияние погрешности наладки кривошипных и гидравлических прессов на точность поковок, получаемых холодной объемной штамповкой. Вестник МГТУ им. Н.Э. Баумана. Сер. Машиностроение. 2002. № 2 с. 115- 126.
- Ланской Е.Н. Общие методы анализа жесткости прессов для объемной штамповки / Кузнечно-штамповочное производство.- 1969. - № 5. - с. 29-32.
- Ланской Е.Н. Влияние жесткости процесса на точность штамповки //Повышение точности и автоматизация штамповки и ковки. М.: «Машиностроение», 1967. с. 21- 30.