Email this article Features of mechanical treatment of parts of ceramic materials
- Authors: Gorelov V.A.1, Alekseev S.V.1
-
Affiliations:
- Moscow State University of Mechanical Engineering (MAMI)
- Issue: Vol 6, No 2-2 (2012)
- Pages: 64-67
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/68420
- DOI: https://doi.org/10.17816/2074-0530-68420
- ID: 68420
Cite item
Full Text
Abstract
The article shows the peculiarities of diamond grinding of parts made of ceramic materials and proposed new directions of the research of improving the quality of ceramic details surfaces.
Keywords
Full Text
##article.viewOnOriginalSite##About the authors
V. A. Gorelov
Moscow State University of Mechanical Engineering (MAMI)
Email: assamodelkin@mail.ru
Dr. Eng.
S. V. Alekseev
Moscow State University of Mechanical Engineering (MAMI)
Email: assamodelkin@mail.ru
References
- The nature of machining damage in brittle materials / D.B. Marchall, A.G. Evans, B.T. Khuri – Yakub et al. // Pros. Poyol. Soc (London) Ser.A. – 1983. – v385, № 1789. p-461 -475
- Marsh D.M. Stress concentrations a crystal surfaces and the embrittlement of sodium chloride // Phil. Mag. – 1960 v 5, №58, P1197 – 1199
- Gielisse P.I., Stanislao I., Mechanical methodis of ceramic finishing // NBS, 1972 № 348 – Spec. publ. – p5 – 35
- Томимори Х. Шлифование тонкой керамики // Кикай Гидзюцу – 1984 Т.32. №2 – с. 36 - 40
- Ито С. Прецизионное шлифование тонкой керамики // Кикай Токогу, - 1983. – Т.27, №6. с. 36 – 40
- Allor R.L., Govila R.K., Whalen T.I. Influence of Strength Properties of Turbine Materials. Engineering and Research staff, Ford Motor Go Deaborn, M14821. Ceramic Proceedings, 1982 v 3, №7/8 pp 392 – 404
- Обоснование методики входного неразрушающего контроля. Технический отчет УДК 620 179. 16: 621. 039 МИФИ 1991 г.
- Горелов В.А. Разработка методов и средств эффективного выбора режимов резания труднообрабатываемых материалов на основе термосиловых характеристик процессов. Диссертация д.т.н.: 05.03.01 – Москва, 2007. 384 с.
