Email this article Statistical modeling of the output parameters in process of machining of ceramic composite materials with using bound-abrasive
- Authors: Bakharev V.P.1, Knutova E.E.1
-
Affiliations:
- Branch of the Moscow State Industrial University in Kineshma
- Issue: Vol 6, No 2-2 (2012)
- Pages: 14-21
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/68392
- DOI: https://doi.org/10.17816/2074-0530-68392
- ID: 68392
Cite item
Full Text
Abstract
The article describes theoretical and experimental results of the statistical simulation of ceramics after treatment using bound-abrasive АС4 63/50 processes. The article presents statistical equations with a subsequent decrease of the problem dimension with the aim of adequate analysis of the studied patterns. The experimental dependence of the output process indicators are described (removal rate and surface roughness) in the field of statistical optimum response function when processing ceramics VK-100 using the method of finishing with the help of bound-abrasive.
Full Text
##article.viewOnOriginalSite##About the authors
V. P. Bakharev
Branch of the Moscow State Industrial University in Kineshma
Email: kineshma.msiu@rambler.ru
Ph.D.
E. E. Knutova
Branch of the Moscow State Industrial University in Kineshma
Email: kineshma.msiu@rambler.ru
References
- Technische Keramik: Aufbau, Eigenschaften, Herstellung, Bearbeitung, Prüfung / Hrsg.: Horst-Dieter Tietz. Düsseldorf: VDI-Verl, 1994. 364 c.
- Бахарев В.П. Конструкторско-технологическое сопровождение производства изделий из керамических и композиционных материалов // Конструкции из композиционных материалов. 2008. Вып. 3. С. 34 – 46.
- Орлов П.Н. Алмазно-абразивная доводка деталей. Сер. С-Х-4, М.: НИИмаш, 1972. 200с.
- Кащеев В.Н. Процессы в зоне фрикционного контакта металлов. М.: Машиностроение, 1978. 213 с.
- Старков В.К. Физика и оптимизация резания материалов. М.: Машиностроение, 2009. 640с.
