Modeling of electromagnetic field in the resonator with regard to the measurement of the fuels water cut



Cite item

Full Text

Abstract

In this article results of an experimental study of cylindrical cavity resonator with a thin layer of humidity on the lower end wall are presented. Analysis of the known methods was carried out using simulation by finite element method in the system ANSYS. The practical application of research results could be a detection of precipitated water in aviation kerosene.

About the authors

G. A. Kardyshev

Moscow State University of Mechanical Engineering (MAMI)

Email: gkardashev@yandex.ru
Dr.Eng., Prof.

A. L. Shatalov

Moscow State University of Mechanical Engineering (MAMI)

Dr.Eng., Prof.

M. A. Suslin

Moscow State University of Mechanical Engineering (MAMI)

Ph.D.

References

  1. Беликов А.М. Авиационные топлива и смазочные материалы / А. М. Беликов, Э. В. Корабельников, В. А. Судца, – Ставрополь: СВВАИУ им. Маршала авиации , 2009 – 246 с.
  2. Григорьев М.А., Борисова Г.В. Очистка топлива в двигателях внутреннего сгорания. М.: Машиностроение, 1991. - 208 с.
  3. Неразрушающий контроль и диагностика. Справочник под редакцией В.В.Клюева. –М.: Машиностроение. 1995. с. 487.
  4. Берлинер М.А. Измерение влажности –М.: Энергия 1973, - 201 с.

Copyright (c) 2012 Kardyshev G.A., Shatalov A.L., Suslin M.A.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies