Obtaining of optimum parameters and modes for ultrasonic diamond milling of glass-ceramic
- Authors: Perepechkin A.A1, Demidov D.V1, Opal'nickij A.I1, Petrov K.V1
-
Affiliations:
- FGUP «NPO «Tehnomash», Moscow State University of Mechanical Engineering (MAMI)
- Issue: Vol 7, No 2-2 (2013)
- Pages: 267-273
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/68303
- DOI: https://doi.org/10.17816/2074-0530-68303
- ID: 68303
Cite item
Full Text
Abstract
The article contains analysis of modern materials and prospects of its application. It considers two variants of ultrasonic milling of various tools. This article describes the effect of volumetric measuring, tool diameter on the roughness and the spherical radius in ultrasonic cutting of glass-ceramic. It contains the diagram of tool degradation depending on punched holes. The work contains selection of the most suitable parameters of the regime to achieve the accuracy and quality of processing.
Full Text
##article.viewOnOriginalSite##About the authors
A. A Perepechkin
FGUP «NPO «Tehnomash», Moscow State University of Mechanical Engineering (MAMI)
Email: artik_footbol@mail.ru
8(929)5784994
D. V Demidov
FGUP «NPO «Tehnomash», Moscow State University of Mechanical Engineering (MAMI)
Email: artik_footbol@mail.ru
8(929)5784994
A. I Opal'nickij
FGUP «NPO «Tehnomash», Moscow State University of Mechanical Engineering (MAMI)
Email: artik_footbol@mail.ru
8(929)5784994
K. V Petrov
FGUP «NPO «Tehnomash», Moscow State University of Mechanical Engineering (MAMI)
Email: artik_footbol@mail.ru
8(929)5784994
References
- Наукоемкие технологии машиностроительного производства: Физико-химические методы и технологии: учебное пособие / Ю.А.Моргунов, Д.В.Панов, Б.П.Саушкин, С.Б.Саушкин; под ред. Б.П.Саушкина. – М.: Издательство «Форум», 2013. –с.: ил. – (Высшее образование)
- Физико-химические методы обработки в производстве газотурбинных двигателей / Ю.С.Елисеев, Б.П.Саушкин; под ред. Б.П.Саушкина. – М.: Изд-во МГТУ им. Н.Э.Баумана, 2010. – 456 с.
- Ультразвуковая размерная обработка материалов. Хмелев В.Н., Барсуков Р.В., Цыганок С.Н. Монография // Алт. гос. Техн. Ун-т. им. И.И. Ползунова. – Барнаул: изд. АлтГТУ, 1997. – 120 с.
- Шандров Б.В. Прогрессивные технологии автомобилестроения // Журнал автомобильных инженеров, №6. 2004. – 26 с.
- Шандров Б.В., Вартанов М.В. Новые технологии автомобилестроения // Наука производству, № 4. 2005. – 15 с.
- Моргунов Ю.А., Опальницкий А.И., Перепечкин А.А. Современное состояние и перспективы применения в отрасли ультразвуковой размерной обработки изделий. Журнал «Известия МГТУ «МАМИ», 2012, №2, стр.140.144.
- Саушкин Б.П., Шандров Б.В., Моргунов Ю.А. Перспективы развития и применения физико-химических методов и технологий в производстве двигателей. Журнал «Известия МГТУ «МАМИ», 2012, №2, стр.242…248.