Calculation based on capacity of the crank hot-stamping presses for technological processes of thermomechanical treatment
- Authors: Radkevich M.M1, Fomin D.J.1
-
Affiliations:
- St.Petersburg State Polytechnical University
- Issue: Vol 7, No 2-2 (2013)
- Pages: 212-216
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/68232
- DOI: https://doi.org/10.17816/2074-0530-68232
- ID: 68232
Cite item
Full Text
Abstract
This article describes the calculation of the force stamping elongated forging at different temperatures in the open die by the M.V.Storozhev’s formula and compares the effort with stamping identical forgings as a result of the finite-element modeling. Options regarding corrections formulas are offered.
Keywords
Full Text
##article.viewOnOriginalSite##About the authors
M. M Radkevich
St.Petersburg State Polytechnical UniversityDr.Eng., Prof.; +7 (812) 552-6623, +7 (812) 552-9302
D. Ju Fomin
St.Petersburg State Polytechnical University+7 (812) 552-6623, +7 (812) 552-9302
References
- Ребельский А.В. Основы проектирования процессов горячей объемной штамповки.- М.:Машиностроение,1965.
- Прозоров Л.В. Прессование стали. - М.: Машгиз,1956.
- Сторожев М.В. Ковка и объемная штамповка стали: Справочник /Под ред. М.В. Сторожева. –Т1-2.- М.: Машиностроение, 1967-1968.
- Семенов Е.И. Ковка и штамповка. - М.: Машиностроение, 2010
- Соколов А.В., Палтиевич А.Р., Кирилянчик А.С. Проектирование технологических процессов кузнечно – штамповочного производства. - М.: МАТИ, 2007.
- Губкин С. И. Пластическая деформация металлов. Т.1-3. — М.: Металлургиздат, 1960-61.