Simulation of mixing in engine with split charge in a cylinder



Cite item

Full Text

Abstract

The authors study an inlet system of supplying the cylinder with split charge through a tangential split inlet duct. There is built a plant at which mixing was simulated, resulting in a visual picture of the distribution of charge in the cylinder at different air flows. The calculations proved the possibility of obtaining a stable split of charge in the cylinder in case of the use of the designed inlet system.

About the authors

I. V. Kuznetsov

Moscow State Industrial University (MSIU); 30th Central Scientific Research Institute of the Ministry of Defence of the Russian Federation

Email: sam61@mail.msiu.ru
Dr.Eng., Prof.; +7-915-159-44-62

A. M. Sychev

Moscow State Industrial University (MSIU); 30th Central Scientific Research Institute of the Ministry of Defence of the Russian Federation

Email: sam61@mail.msiu.ru
+7-915-159-44-62

A. V. Denisov

Moscow State Industrial University (MSIU); 30th Central Scientific Research Institute of the Ministry of Defence of the Russian Federation

Email: sam61@mail.msiu.ru
Dr.Eng., Prof.; +7-915-159-44-62

References

  1. Кузнецов И.В. Увеличение мощности, улучшение топливной экономичности, экологических показателей и детонационных качеств в двигателе внутреннего сгорания с искровым зажиганием. - М.: МГИУ, 2008. - 158 с.
  2. Дубнищев Ю.Н., Арбузов В.А., Белоусов П.П., Белоусов П.Я. Оптические методы исследования потоков. - Новосибирск: Сибирское университетское издательство, 2003. - 16 с.

Copyright (c) 2013 Kuznetsov I.V., Sychev A.M., Denisov A.V.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies