Email this article Damping explosion protection system for structures on the basis of aluminum foam
- Authors: Bondar V.S1, Temis Y.M1, Biryukov M.V1
-
Affiliations:
- Moscow State University of Mechanical Engineering (MAMI), Baranov Central Institute of Aviation Motor Development
- Issue: Vol 7, No 3-1 (2013)
- Pages: 40-45
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/67983
- DOI: https://doi.org/10.17816/2074-0530-67983
- ID: 67983
Cite item
Full Text
Abstract
Foam aluminum is considered the most promising material in the energy absorbing systems. The article presents a comparative study of the influence of shock waves of varying intensity on a steel plate protected with aluminum foam and unprotected.
Keywords
Full Text
##article.viewOnOriginalSite##About the authors
V. S Bondar
Moscow State University of Mechanical Engineering (MAMI), Baranov Central Institute of Aviation Motor Development
Email: tm@mami.ru. jmt@newmail.ru
Dr. Sc., Prof.; +7 (495) 223-05-23
Y. M Temis
Moscow State University of Mechanical Engineering (MAMI), Baranov Central Institute of Aviation Motor Development
Email: tm@mami.ru. jmt@newmail.ru
Dr. Eng., Prof.; +7 (495) 223-05-23
M. V Biryukov
Moscow State University of Mechanical Engineering (MAMI), Baranov Central Institute of Aviation Motor Development
Email: tm@mami.ru. jmt@newmail.ru
+7 (495) 223-05-23
References
- Rajan Sriram, Uday K. Vaidya, Blast impact on aluminium foam composite sandwich panels- 8th International LS-DYNA Users Conference, 14:29-38.
- Randers-Pehrson, G., and Bannister, K.A., «Airblast loading model for DYNA2D and DYNA3D», ARLT-TR-1310, Army Research Laboratory, Aberdeen proving ground (1997).
- Kingery, C.N., and Bulmash, G., «Air-blast parameters from TNT spherical air burst and hemispherical surface blast», ARBRL-TR-02555, U.S. Army Ballistic Research Laboratory, Aberdeen Proving Ground, (1984).
Supplementary files
