The technology of precision tubular products using compression on the profile mandrel rolling-drawing non-driven rollers
- Authors: Rozov J.G1
-
Affiliations:
- Kherson National Technical University
- Issue: Vol 7, No 2-2 (2013)
- Pages: 28-32
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/67978
- DOI: https://doi.org/10.17816/2074-0530-67978
- ID: 67978
Cite item
Full Text
Abstract
Manufacture of long hollow parts specified internal profile of the hard-deformable alloys based on process improvement of cold deformation of a tubular workpiece requires the development of science-based modes of technology to assure the quality of products, reduction of the complexity of manufacturing, steel intensity etc. Stress-strain state and energy-power parameters of the rolling-drawing process non-driven roller tubular billet on the profile mandrel is define by computer analysis that have been made. The shape and dimensions of mandrel corresponded to the inner surface of the rifle barrel with the polygon profile type. As a result, it has been developed and manufactured the corresponding technological device and has been manufactured the product by above method.
Keywords
Full Text
##article.viewOnOriginalSite##References
- DEFORMTM 3D. Version 6.1 User’s Manual Scientific Forming Technologies Corporation, 2008j. ─420s.
- Пасечник С. Пистолет – пулемет "Эльф-2"/ С. Пасечник // Охота и оружие. – 2000. – № 6. – С.6-7.
- Справочник по оборудованию для листовой штамповки. Под общей редакцией Рудмана Л.И.; Киев, «ТЕХНИКА», 1989г.-233с.