Study of vibration sensitivity of a rotor of stationary gas-turbine unit on slide bearings to change of main settings of the system
- Authors: Temis Y.M1, Temis M.Y1, Egorov A.M1
-
Affiliations:
- Central Institute of Aviation Motors
- Issue: Vol 7, No 1-3 (2013)
- Pages: 139-147
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/67846
- DOI: https://doi.org/10.17816/2074-0530-67846
- ID: 67846
Cite item
Full Text
Abstract
The results of the study of vibration sensitivity of a rotor of stationary gas-turbine unit (GTU) on slide bearings to the change of the main settings of the system are described in the paper. The authors used a beam model of the rotor which takes into account the non-linear stiffness and damping characteristics of an oil film in radial bearings, and a multi-disciplinary model of rotor dynamics including the model of the shaft, rotating discs and radial bearings. Numerical calculations for calculating the orbits of GTU rotor at different operating conditions are performed. The paper also demonstrates the sensitivity of the “rotor-bearing” system to a change of system parameters such as a disbalance of the rotor, constructive damping and viscosity of the oil in bearings.
Full Text
##article.viewOnOriginalSite##About the authors
Y. M Temis
Central Institute of Aviation Motors
Email: tejoum@ciam.ru
Dr.Eng., Prof.; +7 (495) 361-64-82
M. Y Temis
Central Institute of Aviation Motors
Email: tejoum@ciam.ru
Ph.D.; +7 (495) 361-64-82
A. M Egorov
Central Institute of Aviation Motors
Email: tejoum@ciam.ru
+7 (495) 361-64-82
References
- Рейнольдс О. Гидродинамическая теория смазки и ее применение к опытам Тоуэра // Гидродинамическая теория смазки / Под редакцией и с дополнительными статьями проф. Л.С. Лейбензона. – М.: ГТТИ, 1934. – с. 247-360.
- Темис Ю.М., Темис М.Ю. Характеристики жесткости и демпфирования гидродинамического подшипника скольжения с податливыми рабочими поверхностями, Трение и Износ, № 2, 2007. – с. 128-137.
- Клит П., Лунн Дж. Вычисление динамических коэффициентов радиального подшипника с использованием вариационного подхода, Проблемы трения и смазки, № 3 (1986) с. 91-95.
- Temis J.M., Temis M.J. Influence of Elastohydrodynamic Contact Deformations in Fluid Film Bearing on High-Speed Rotor Dynamic, Proc. 2nd Int. Symp. on Stability Control of Rotating Machinery, Gdansk, Poland (2003) p. 150-159.
- Bathe K-J. Finite Element Procedures, Prentice Hall (1995) 1037.