Email this article Construction features of energy-absorbing seats used in the armored and aviation vehicles
- Authors: Kulakov N.A1, Gavrilov E.V1
-
Affiliations:
- Moscow State University of Mechanical Engineering (MAMI)
- Issue: Vol 8, No 1-1 (2014)
- Pages: 29-38
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/67689
- DOI: https://doi.org/10.17816/2074-0530-67689
- ID: 67689
Cite item
Full Text
Abstract
The article provides an overview of energy-absorbing seats, used in the armored and aviation vehicles since the 60s of the twentieth century till the present day. There were shown some different types of energy-absorbing elements used in seats. Constructions of mine seats developed at scientific technical center “Spetstekhnika” of Moscow State University of Mechanical Engineering (MAMI) were presented.
Full Text
##article.viewOnOriginalSite##About the authors
N. A Kulakov
Moscow State University of Mechanical Engineering (MAMI)
Email: kulakov@mami.ru
Ph.D.; +7 495 223-05-23, ext. 1507
E. V Gavrilov
Moscow State University of Mechanical Engineering (MAMI)
Email: andhover@mail.ru
+7 495 223-05-23, ext. 1507
References
- Авиационные правила. Часть 29 «Нормы летной годности винтокрылых аппаратов транспортной категории» (АП-29).
- Кулаков Н.А., Гаврилов Е.В. Разработка математической модели энергопоглощающего кресла с использованием результатов копровых испытаний. - М.: Известия МГТУ «МАМИ», № 2(14), 2012, т. 1. - С. 206-213.
- Патент амортизационное кресло транспортного средства (патент РФ № 2448848, зарегистрирован 27.04.12), авторы Кулаков Н.А., Любин А.Н.
- Патент Crashworthy aircraft seat US 6394393 B1.
- Carr, R. W., and Phillips, N. S., “Definition of Design Criteria for Energy Absorption Systems”, Beta Industries Incorporated, Report No. NADC-AC-7007, Naval Air Development Center, Warminster, Pennsylvania, AD 871040, 11 June 1970.
- Desjardins, Stanley P., and Harrison, H., “The Design, Fabrication, and Testing of an Integrally Armored Crashworthy Crewseat”, Dynamic Science, Division of Marshall Industries; USAAMRDL Technical Report 71-54, Eustis Directorate, U. S. Army Air Mobility Research and Development Laboratory, Fort Eustis, Virginia, January 1972, AD 742733.
- Desjardins, Stanley P. The evolution of energy absorption systems for crashworthy helicopter seats. American Helicopter Society 59th Annual Forum, Phoenix, Arizona, May 6-8, 2003
- Domzalski, L. P., “Dynamic Performance of a Variable Load Energy Absorber”, Report No. NADC-81227-60, Aircraft and Crew Systems Technology Directorate, Naval Air Development Center, Warminster, Pennsylvania 18974, February 1982.
- Guist LeRoy R., Donald P. Marble, Prediction of the inversion load of a circular tube. NASA Technical Note NASA TN D-3622, Washington, d. C., September 1966.
- Kroell, C. K. “A Simple, Efficient, One Shot Energy Absorber”, Reprint from Bulletin No. 30, Shock, Vibration and Associated Environments, Part III, February 1962, General Motors Research Laboratory, Warren, Michigan.
- Smit, T. A., and Buys, P., “Energy Absorbing Links”, Report FS-12, Royal Netherlands Aircraft Factories, Fokker, Amsterdam, The Netherlands, June 1963.
- Svoboda, C. M., and Warrick, J. C., “Design and Development of Variable-Load Energy Absorbers”, Simula Inc., Report No. NADC-80257-60, Aircraft and Crew Systems Technology Directorate, Naval Air Development Center, Warminster, Pennsylvania, 18974, June 16, 1981.
- United States Code of Federal Regulations, Title 14 Part 27 - “Airworthiness Standards: Normal Category Rotorcraft”, 14CFR27.562 (Subpart 562), Washington, DC, October 1, 2002.
- Warrick, J. C., and Coltman, J. W., “Design and Development of an Automatically Controlled Variable Load Energy Absorber”, Simula Inc., Report No. NADC-82025-60, Aircraft and Crew Systems Technology Directorate, Naval Air Development Center, Warminster, Pennsylvania 18974, March 1984.
Supplementary files
