Email this article Optimization of heat exchanger heat transfer surface of the engine with external heat supply
- Authors: Ilyin A.A.1, Merkulov V.I.1
-
Affiliations:
- Moscow State University of Mechanical Engineering (MAMI)
- Issue: Vol 8, No 4-1 (2014)
- Pages: 19-22
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/67631
- DOI: https://doi.org/10.17816/2074-0530-67631
- ID: 67631
Cite item
Full Text
Abstract
The paper describes the calculation the heat transfer surface of the heat exchanger of the power plant. These calculations use ANSYS CFX software package. The work determined the construction that provides the biggest temperature difference between the inlet and outlet of the coolant.
Keywords
Full Text
##article.viewOnOriginalSite##About the authors
A. A. Ilyin
Moscow State University of Mechanical Engineering (MAMI)
Email: aa.iliyn33@gmail.com
+7 926 668-04-34
V. I. Merkulov
Moscow State University of Mechanical Engineering (MAMI)
Email: aa.iliyn33@gmail.com
Dr.Eng., Prof.; +7 926 668-04-34
References
- Кутателадзе С.С., Боришанский В.М. Справочник по теплопередаче. - М.: Наука. - 1986. - C. 414.
- Варгафтик Л.П., Филиппов А.А. Справочник по теплопроводности жидкостей и газов - М.: Энергоатомиздат. - 1990. - С. 352.
- ANSYS ICEM CFD Tutorial Manual. - С. 313.
Supplementary files
