RADIATION AND THERMAL EMBRITTLEMENT OF RPV STEELS: THE LINKS OF EMBRITTLEMENT MECHANISMS, FRACTURE MODES AND MICROCRACK NUCLEATION AND PROPAGATION PROPERTIES. Part 3: Brittle fracture modelling and analysis of the link of microcrack nucleation and propagation properties and embrittlement mechanisms
- Authors: Margolin B.Z.1, Fomenko V.N.1, Shvetsova V.A.1, Yurchenko E.V.1
-
Affiliations:
- NRC “Kurchatov Institute” – CRISM “Prometey”
- Issue: No 2(118) (2024)
- Pages: 166-186
- Section: Radiation materials science
- URL: https://journals.rcsi.science/1994-6716/article/view/306077
- DOI: https://doi.org/10.22349/1994-6716-2024-118-2-166-186
- ID: 306077
Cite item
Abstract
Radiation and thermal embrittlement of RPV steels are studied from viewpoint of links of brittle fracture properties on micro- and macroscales. Brittle fracture properties on macroscale (such as fracture toughness and fracture stress) and the critical parameters controlling nucleation and propagation of microcracks are determined on the basis of the probabilistic brittle fracture model Prometey. The experimental and numerical investigations are performed for 2Cr–Ni–Mo-V steel and A533 steel used for RPVs of WWER and PWR types. RPV steels are studied in the following states: (1) the initial (as-produced) state; (2) the thermally-embrittled state modelling hardening mechanism of embrittlement; (3) the thermally-embrittled state modelling non-hardening mechanism of embrittlement; (4) the irradiated state. The test results of various specimens (smooth and notched round bars and cracked compact tension specimens) from the investigated steels in various states are represented over brittle fracture temperature range. Brittle fracture modelling is performed with the Prometey model for all the above specimens, and the experimental and numerical results are compared. On the basis of the obtained results the links between embrittlement mechanisms, fracture modes and microcrack nucleation and propagation properties are found.
About the authors
B. Z. Margolin
NRC “Kurchatov Institute” – CRISM “Prometey”
Author for correspondence.
Email: mail@crism.ru
Dr Sc. (Eng) 49 Shpalernaya St, 191015 St Petersburg, Russian Federation
V. N. Fomenko
NRC “Kurchatov Institute” – CRISM “Prometey”
Email: mail@crism.ru
Cand Sc. (Eng) 49 Shpalernaya St, 191015 St Petersburg, Russian Federation
V. A. Shvetsova
NRC “Kurchatov Institute” – CRISM “Prometey”
Email: mail@crism.ru
Cand Sc. (Phys-Math) 49 Shpalernaya St, 191015 St Petersburg, Russian Federation
E. V. Yurchenko
NRC “Kurchatov Institute” – CRISM “Prometey”
Email: mail@crism.ru
Cand Sc. (Eng) 49 Shpalernaya St, 191015 St Petersburg, Russian Federation
References
- Марголин Б. З., Фоменко В. Н., Гуленко А. Г., Костылев В. И. Швецова В. А . Дальнейшее развитие модели Prometey и метода Unified Curve. Часть 1. Развитие модели Prometey // Вопросы материаловедения. – 2016. – № 4 (88). – С. 120–150.
- Margolin, B.Z., Fomenko, V.N., Gulenko, A.G., Kostylev, V.I., Shvetsova, V.A ., Further improvement of the Prometey model and Unified Curve method. Part 1. Improvement of the Prometey model. Eng.Fract.Mech . 2017, No 182, pp. 467–486.
- Рыбин В. В . Большие пластические деформации и разрушение металлов. – М., Металлургия, 1986. – 224 с.
- Mudry, F ., A local approach to cleavage fracture, Nuclear Engineering and Design , 1987, No 105, pp. 65–76.
- Марголин Б. З., Швецова В. А., Гуленко А. Г., Костылев В. И . Применение нового критерия хрупкого разрушения для прогнозирования трещиностойкости сталей для сосудов давления // Проблемы прочности. – 2006. – № 29(9). – С. 697–713.
- Margolin, B.Z., Shvetsova, V.A., Gulenko, A.G., Kostylev, V.I. , Application of a new cleavage fracture criterion for fracture toughness prediction for RPV steels, Fatigue & Frac. of Engng. Ma- ter. & Struc., 2006, No 29 (9), pp. 697–713.
- Марголин Б. З., Гуленко А. Г., Николаев В. А., Рядков Л. Н. Новый инженерный метод для прогнозирования температурной зависимости трещиностойкости сталей для сосудов давления // Проблемы прочности. – 2003. – № 5. – С. 12–35.
- Марголин Б. З., Фоменко В. Н., Гуленко А. Г., Костылев В. И . Дальнейшее развитие модели Prometey и метода Unified Curve. Часть 2. Развитие метода Unified Curve // Вопросы материаловедения. – 2016. – № 4(88). – C. 151–178.
- Margolin, B.Z., Fomenko, V.N., Gulenko, A.G., Kostylev, V.I., Shvetsova, V.A. , On issue of comparison of the Unified Curve and Master Curve methods and application for RPV structural integrity assessment, Strength of Materials , 2016, No 48 (2), pp. 227–250.
- Margolin, B.Z, Yurchenko, E.V., Morozov, A.M., Pirogova, N.E., Brumovsky, M., Analysis of a link of embrittlement mechanisms and neutron flux effect as applied to reactor pressure vessel materials of WWER, J. Nucl. Mater ., 2013, No 434, pp. 347–356.
- Margolin, B.Z., Shvetsova, V.A.,·Gulenko, A.G ., Radiation embrittlement modelling in multi-scale approach to brittle fracture of RPV steels, Int. J. Fract ., 2013, No 179, pp. 87–108.
- Kandidis, E., Marini, B., Allais, L., Pineau, A. , Validation of a statistical criterion for intergranular brittle fracture of a low alloy steel through uniaxial and biaxial (tension-torsion) tests, Int. J of Fracture, 1994, No 66, pp. 273–294.
- Yahya, O.M.L., Borit, F.B., Piques, R., Pineau, A. , Statistical modelling of intergranular brittle fracture in low alloy steel, Fat. & Fract. of Eng. Mater. & Struct. , 1998, V. 21, Is. 12, pp. 1485–1502.
- Margolin, B.Z., Shvetsova, V.A., Gulenko, A.G., Kostylev, V.I ., Prometey local approach to brittle fracture: development and application, Eng. Fract. Mech ., 2008, V. 75, pp. 3483–3498.
- Gurovich, B.A., Kuleshova, E.A., Shtrombakh, Y.I., et al ., Intergranular and intragranular phosphorus segregation in Russian pressure vessel steels due to neutron irradiation, J. Nucl. Mater ., 2000, No 279, pp. 259–272.
- Hawthorne, J.R. , Radiation embrittlement, Briant C., Banerji S. (Eds.), Embrittlement of engineering alloys, New York: Academic Press, 1983.
Supplementary files

