Email this article Development of Calculation Methods for the Uncertainty of Special Mechanical Characteristics of Structural Steel
- Authors: Peglivanova M.M.1, Yunev V.D.1, Filin V.Y.1
-
Affiliations:
- NRC 'Kurchatov Institute' – CRISM 'Prometey'
- Issue: No 2(118) (2024)
- Pages: 154-165
- Section: Structural-working strength and serviceability of materials
- URL: https://journals.rcsi.science/1994-6716/article/view/306071
- DOI: https://doi.org/10.22349/1994-6716-2024-118-2-154-165
- ID: 306071
Cite item
Open Access
Access granted
Subscription Access
Abstract
Understanding of an accuracy related to the evaluation of special mechanical performances of materials is an essential part of the quality control system providing for safe operation of modern structures in severe climatic conditions in far locations where any emergency and repair activities are hindered. In absence of a priori known values of such performances the methodic basis of uncertainty calculation procedures should be developed. Relevance of the problem is supported by the requirement of Russian Accreditation Agency regarding the availability and due application of the corresponding methods in test laboratories as for directly measured parameters as for ones calculated from the test results. Uncertainty calculation procedures are suggested as a background for the developed specialized software.
About the authors
M. M. Peglivanova
NRC 'Kurchatov Institute' – CRISM 'Prometey'
Author for correspondence.
Email: mail@crism.ru
Dr Sc. (Eng) 49 Shpalernaya St, 191015 St Petersburg, Russian Federation
V. D. Yunev
NRC 'Kurchatov Institute' – CRISM 'Prometey'
Email: mail@crism.ru
49 Shpalernaya St, 191015 St Petersburg, Russian Federation
V. Yu. Filin
NRC 'Kurchatov Institute' – CRISM 'Prometey'
Email: mail@crism.ru
Dr Sc. (Eng) 49 Shpalernaya St, 191015 St Petersburg, Russian Federation
References
- Heisenberg, W., Über den anschaulichen Inhalt der quantentheoretischen Kinematik und Mechanik, Zeitschrift für Physik, 1927, V. 43, pp. 172–198 (English translation in the book: Wheeler, J.A., Zurek, H., Quantum Theory and Measurement, Princeton Univ. Press., 1983, pp. 62–84).
- RMG 29–2013: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions, Moscow: Standardinform, 2014.
- GOST 34100.1–2017: Uncertainty of measurement. Part 1: Introduction to guides on the expression of uncertainty in measurement, Moscow: Standardinform, 2018.
- GOST 34100.3.1–2017: Uncertainty of measurement. Part 3: Guide to the expression of uncertainty in measurement. Supplement 1. Propagation of distributions using a Monte-Carlo method, Moscow: Standardinform, 2018.
- ND No 2-020101-174-E: Rules for the classification and construction of sea-going ships. Part 13: Materials, Russian Maritime Register of Shipping, St Petersburg, 2023.
- Certificate of software state registration No 2024610366 dated January 10, 2024, 'Promtest uncertainty' – Uncertainty calculation of the measured values of structural steel mechanical performances.
- Pokhodun, A.I., Experimental research methods. Errors and uncertainties of measurements: study guide, St Petersburg, ITMO University, 2006.
- Guide to express the uncertainty of measurements, St Petersburg: VNIIM by D. I. Mendeleev, 1999.
- Gilat, A., MATLAB: An introduction with Applications, 5th Edition. Moscow: DMK Press, 2016.
- Bell, S., A Beginner’s Guide to Uncertainty of Measurement, Crown Copyright, 1999.
- Ilyin, A.V., Filin, V.Yu., Gusev, M.A., Markadeeva, A.Yu, Yurkov, M.E., Practice of certification tests of high-strength steel to get a Recognition certificate of the Russian Maritime Register of Shipping, Proceedings of the 6th International Scientific-Technical Conference 'Sudometrika-2016', pp. 111–118.
Supplementary files
