Email this article Calculation and investigation of the phase composition of a composite intermetallic layer synthesized on the surface of VT6 titanium alloy from Cu–SiC and Al–SiC powders
- Authors: Gerashchenkov D.A.1, Udalov Y.P.2
-
Affiliations:
- NRC 'Kurchatov Institute' – CRISM 'Prometey'
- SPbGTI (TU)
- Issue: No 1(113) (2023)
- Pages: 62-71
- Section: Functional materials
- URL: https://journals.rcsi.science/1994-6716/article/view/304961
- DOI: https://doi.org/10.22349/1994-6716-2023-113-1-62-71
- ID: 304961
Cite item
Open Access
Access granted
Subscription Access
Abstract
The physical and chemical foundations of the technology of cold gas-dynamic spraying of coatings on titanium for two types of charge are considered, in one of which chemically inactive copper is used as a ductile metal in combination with abrasive silicon carbide powder, in the other – chemically active aluminum in combined with silicon carbide. A thermodynamic modeling technique has been developed to select the composition of the coating charge and predict the change in its phase composition at high temperature.
About the authors
D. A. Gerashchenkov
NRC 'Kurchatov Institute' – CRISM 'Prometey'
Author for correspondence.
Email: mail@crism.ru
Cand Sc. (Eng) 49 Shpalernaya St, 191015, St Petersburg
Yu. P. Udalov
SPbGTI (TU)
Email: udalov@lti-gti.ru
Dr Sc. (Chem) 26 Ave Moskovsky, 190013, St Petersburg
References
- Kozlov, I.A., Leshchev, K.A., Nikiforov, A.A., Demin, S.A., Kholodnoe gazodinamicheskoe napylenie [Cold gas-dynamic spraying]: review, Trudy VIAM, 2020, No. 8(90), pp. 77-93.
- Inozemtsev, A.A., Bashkatov, I.G., Koryakovtsev, A.S., Titanovye splavy v izdeliyakh razrabotki OAO ‘Aviadvigatel’, [Titanium alloys in products developed by JSC Aviadvigatel], Sovremennye titanovye splavy i problemy ikh razvitiya, Moscow: VIAM, 2010, pp. 43-46.
- Grinberg B.A., Ivanov M.A., Intermetallidy Ni3Al i TiAl: mikrostruktura, deformatsionnoe povedenie [Ni3Al and TiAl intermetallides: microstructure, deformation behavior], Ekaterinburg: Ural Branch of the Russian Academy of Sciences, 2002.
- Nochovnaya, N.A., Bazyleva, O.A., Kablov, D.E., Panin, P.V., Intermetallidnye splavy na osnove titana i nikelya [Intermetallic alloys based on titanium and nickel], Kablov, E.N., (Ed.), Moscow: VIAM, 2018.
- Proceedings of the 10th World Conf. on Titanium (Titanium’2003), Science and Technology, Hamburg, 2003, No 1-5, p. 3425.
- Tang, C., Cheng, F., Man, H., Effect of laser surface melting on the corrosion and cavitation erosion behaviors of a manganese - nickel - aluminum bronze, Materials Science and Engineering: A, 2004, No. 373(1-2), pp. 195-203, https://doi.org/10.1016/j.msea.2004.01.016.
- Colinet, C., Pasturel, A., Buschow, K.H.J., Enthalpies of formation of Ti-Cu intermetallic and amorphous phases, Journal of Alloys and Compounds, 1997, No 247, pp. 15-19.
- Radishevskii, V.L., Lepakova, O.K., Afanasiev, N.I., Sintez, struktura i svoystva MAKH-faz Ti3SiC2 i Nb2AlC [Synthesis, structure, and properties of the Ti3SiC2 and Nb2AlC MAX phases], Proc. 12th int. conf. “Prospects for the development of fundamental sciences”, Tomsk, 2015, pp. 502-504.
- Istomin, P.V., Nadutkin, A.B., Ryabkov, Yu.L., Goldin, B.A., Poluchenie Ti3SiC2 [Obtaining Ti3SiC2], Neorganicheskiye materialy, 2006, V. 42, No 3, pp. 292-297.
Supplementary files
