Stress state near dental implants accounting bone tissues resorption

Мұқаба

Дәйексөз келтіру

Толық мәтін

Аннотация

The results of numerical modeling by the boundary integral equations method (BIEM) of the effect of bone tissues resorption on the stress state near screw dental implants under action of normal and inclined compressive loads are presented. The direct version of the BIEM for piecewise homogeneous sub-regions is used. The computation of the implant and the surrounding bone tissues stresses was carried out for plane strain state,  assuming the complete bonding of materials at the interface of the implant and bones (osteointegration) and consisted of two stages: 1) analysis of the entire implant structure with smoothed screw join between implant and the surrounding bone tissues; 2) studies of stress distribution taking into account the shape of the screw join of the implant and bone tissues. The model of the first stage of computations consisted of 7 sub-regions corresponding to the parts of the implant structure and bone tissues zones. On the second stage of computations it was assumed that those hollows in the spongy bone, which had formed in a bone after implant penetration, are conformed to the screw thread on the implant. The effect of bone tissues resorption on stresses concentration  in the screw join of implants  and spongy bone tissue is considered. The creating of  computation models was performed on the assumption that the result of bones resorption is the cavity formation around implants. The computations were performed under the assumption that the bone tissues are isotropic and homogeneous elastic materials.  It was found that as a result of resoprtion, there is a significant stresses redistribution in bone tissues and the implant with maximum equivalent stresses decreasing in the cortical bone tissue and increasing in spongy bone tissue. The results are presented as the distributions of stress intensity along the sub-regions boundaries  of the computational model.

Авторлар туралы

Mikhail Perelmuter

Ishlinsky Institute for Problems in Mechanics of the Russian Academy of Sciences

ORCID iD: 0000-0002-8430-5412
Russia, 119526, Moscow, pr. Vernadskogo, 101-1

Әдебиет тізімі

  1. Параскевич В. Л. Дентальная имплантология: Основы теории и практики. 3-е изд. Mocква : Медицинское информационное агентство, 2011. 400 с.
  2. Brunski J. B. Biomechanical factors affecting the bone-dental implant interface // Clinical Materials. 1992. Vol. 10, iss. 3. P. 153–201. https://doi.org/10.1016/0267-6605(92)90049-Y
  3. Hashim D., Cionca N. A comprehensive review of peri-implantitis risk factors // Current Oral Health Reports. 2020. Vol. 7, iss. 3. P. 262–273. https://doi.org/10.1007/s40496-020-00274-2
  4. Kowalski J., Lapinska B., Nissan J., Lukomska-Szymanska M. Factors influencing marginal bone loss around dental implants: A narrative review // Coatings. 2021. Vol. 11, iss. 7. P. 865–877. https://doi.org/10.3390/coatings11070865
  5. Nimbalkar S., Dhatrak P., Gherde C., Joshi S. A review article on factors affecting bone loss in dental implants // Materials Today: Proceedings. 2021. Vol. 43, pt. 2. P. 970–976. https://doi.org/10.1016/j.matpr.2020.07.428
  6. Aydin K., Okten K., Ugur L. An analytical and numerical approach to the determination of thermal necrosis in cortical bone drilling // International Journal for Numerical Methods in Biomedical Engineering. 2022. Vol. 38, iss. 10. P. 3640–3644. https://doi.org/10.1002/cnm.3640
  7. Kitamura E., Stegaroiu R., Nomura S., Miyakawa O. Influence of marginal bone resorption on stress around an implant — a three-dimensional finite element analysis // Journal of Oral Rehabilitation. 2005. Vol. 32, iss. 4. P. 279–286. https://doi.org/10.1111/j.1365-2842.2004.01413.x
  8. Wolff J., Narra N., Antalainen A.-K., Valasek J., Kaiser J., Sandor G. K., Marcian P. Finite element analysis of bone loss around failing implants // Materials & Design. 2014. Vol. 61. P. 177–184. https://doi.org/10.1016/j.matdes.2014.04.080
  9. Linetskiy I., Demenko V., Linetska L., Yefremov O. Impact of annual bone loss and different bone quality on dental implant success — a finite element study // Computers in Biology and Medicine. 2017. Vol. 91. P. 318–325. https://doi.org/10.1016/j.compbiomed.2017.09.016
  10. Chang Y., Tambe A. A., Maeda Y., Wada M., Gonda T. Finite element analysis of dental implants with validation: To what extent can we expect the model to predict biological phenomena? A literature review and proposal for classification of a validation process // International Journal of Implant Dentistry. 2018. Vol. 4. P. 1–14. https://doi.org/10.1186/s40729-018-0119-5
  11. Buyuk F. N., Savran E., Karpat F. Review on finite element analysis of dental implants // Journal of Dental Implant Research. 2022. Vol. 41, iss. 3. P. 50–63. https://doi.org/10.54527/jdir.2022.41.3.50
  12. Дьяченко Д. Ю., Дьяченко С. В. Применение метода конечных элементов в компьютерной симуляции для улучшения качества лечения пациентов в стоматологии: систематический обзор // Кубанский научный медицинский вестник. 2021. Т. 28, № 5. С. 98–116. https://doi.org/10.25207/1608-6228-2021-28-5-98-116
  13. Wolfe L. A. Stress analysis of endosseous implants using the Boundary Integral Equation (BIE) method // Journal of Biomedical Engineering. 1993. Vol. 15, iss. 4. P. 319–323. https://doi.org/10.1016/0141-5425(93)90009-N
  14. Перельмутер М. Н. Исследование напряженно-деформированного состояния стоматологических имплантатов методом граничных интегральных уравнений // Вестник Пермского национального исследовательского политехнического университета. Механика. 2018. № 2. С. 83–95. https://doi.org/10.15593/perm.mech/2018.2.08
  15. Citarella R., Armentani E., Caputo F., Lepore M. Stress analysis of an endosseus dental implant by BEM and FEM // The Open Mechanical Engineering Journal. 2012. Vol. 6. P. 115–124. https://doi.org/10.2174/1874155X01206010115
  16. Perrella M., Franciosa P., Gerbino S. FEM and BEM stress analysis of mandibular bone surrounding a dental implant // The Open Mechanical Engineering Journal. 2015. Vol. 9. P. 282–292. https://doi.org/10.2174/1874155X01509010282
  17. Бенерджи П., Баттерфилд Р. Метод граничных элементов в прикладных науках. Mocква : Мир, 1981. 494 с.
  18. Перельмутер М. Н. Применение метода граничных элементов при исследовании пространственного напряженного состояния составных конструкций // Проблемы прочности и динамики в авиадвигателестроении. Вып. 4 : сб. ст. Москва : ЦИАМ, 1989. С. 74–99. (Труды ЦИАМ. № 1237).
  19. Perelmuter M. Boundary element analysis of structures with bridged interfacial cracks // Computational Mechanics. 2013. Vol. 51, iss. 4. P. 523–534. https://doi.org/10.1007/s00466-012-0817-4
  20. Perelmuter M. Analysis of interaction of bridged cracks and weak interfaces // International Journal of Mechanical Sciences. 2018. Vol. 149. P. 349–360. https://doi.org/10.1016/j.ijmecsci.2018.10.011
  21. Odin G., Savoldelli C., Bouchard P.-O., Tillier Y. Determination of Young’s modulus of mandibular bone using inverse analysis // Medical Engineering and Physics. 2010. Vol. 32, iss. 6. P. 630–637. https://doi.org/10.1016/j.medengphy.2010.03.009
  22. Король Д. М., Николов В. В., Онипко Е. Л., Ефименко А. С. Определение интенсивности окклюзионного давления у пациентов на ортопедическом приеме // Современная медицина: актуальные вопросы. 2015. № 8–9 (42). С. 40–46. EDN: UINWJH
  23. Misch C. E., Qu Z., Bidez M. W. Mechanical properties of trabecular bone in the human mandible: Implications for dental implant treatment planning and surgical placement // Journal of Oral and Maxillofacial Surgery. 1999. Vol. 57. P. 700–706. https://doi.org/10.1016/S0278-2391(99)90437-8
  24. Reilly D. T., Burstein A. H. The elastic and ultimate properties of compact bone tissue // Journal of Biomechanics. 1975. Vol. 8, iss. 6. P. 393–405. https://doi.org/10.1016/0021-9290(75)90075-5
  25. Олесова В. Н., Бронштейн Д. А., Лернер А. Я., Олесов Е. Е., Бобер С. А., Узунян Н. А. Напряженно-деформированное состояние в протезной конструкции на дентальном имплантате при цементной фиксации искусственной коронки // Российский журнал биомеханики. 2016. Т. 20, № 4. C. 311–315. https://doi.org/10.15593/RZhBiomeh/2016.4.02


Creative Commons License
Бұл мақала лицензия бойынша қолжетімді Creative Commons Attribution 4.0 International License.

Осы сайт cookie-файлдарды пайдаланады

Біздің сайтты пайдалануды жалғастыра отырып, сіз сайттың дұрыс жұмыс істеуін қамтамасыз ететін cookie файлдарын өңдеуге келісім бересіз.< / br>< / br>cookie файлдары туралы< / a>