ADDITIVE DIGITAL TECHNOLOHIES IN DENTISTRY


Cite item

Full Text

Abstract

More than 70 digital systems are represented on the market of dental equipment, 13 of them are in Russia. Therefore, dentists should be aware of the range of digital technologies and their capabilities to provide a client-oriented approach to each clinical situation. Timely training of specialists, fully owning digital technologies, is an important condition for ensuring the quality of dental care.

About the authors

R. S Gvetadze

Central research Institute of dentistry and maxillofacial surgery

119991, Moscow, Russia

D. E Timofeev

Central research Institute of dentistry and maxillofacial surgery

119991, Moscow, Russia

Valentina Gavrilovna Butova

Central research Institute of dentistry and maxillofacial surgery

Email: butova49@rambler.ru
Dr. med. Sci., Professor 119991, Moscow, Russia

A. Yu Jerebcov

Central research Institute of dentistry and maxillofacial surgery

119991, Moscow, Russia

S. N Andreeva

Central research Institute of dentistry and maxillofacial surgery

119991, Moscow, Russia

References

  1. Баршев М.А., Михаськов С.В. Современные CAD/CAM-технологии для стоматологии. Стоматология. 2011; 2: 71-3.
  2. Ряховский А.Н. Цифровая стоматология. М. ООО «Авантис».2010; 282.
  3. Цаликова Н.А., Дзгоева М.Г., Фарниева О.А. Компьютерные технологии в ортопедической стоматологии. Владикавказский медико-биологический вестник. 2013; 16(24-25): 98-103.
  4. CAD/CAM-технология при проектировании и изготовлении зубопротезных конструкций. 2016. http://dentazone.ru/protezirovanie/vidy-uhod/texnologiya-cad-cam.html.
  5. Santos G., Boksman L., Santos M. CAD/CAM- technology and esthetic dentistry: a case report. Compend. Contin. Educ. Dent. 2013; 34(10): 764-8.
  6. Werner H., Mörmann W.H., Tinshert J. State of the Art of CAD/CAM Restorations. 20 years of CEREC CAD/CAM - Systems and Materials. Dental Lab. 2006; 3: 139 - 44.
  7. Ибрагимов Т.И., Цаликова Н.А.Современные компьютерные технологии в ортопедической стоматологии: состояние и перспективы. Вестник ДГМА. 2013; 3(8): 57-9.
  8. Ханахмедов В.А. Уникальная технология CAD-CAM систем в ортопедической стоматологии для изготовления каркасов несъёмных зубных протезов. Анализ различных CAD-CAM систем. Bulletin of Medical Interne Conferences (ISSN 2224-6150).2018; 8: 46-7.
  9. Cohen A. Цифровые технологии будущее стоматологии. Зубной техник. 2014; 5:40-42.[Cohen A. Digital technology and the future of dentistry. Dental technician. 2014; 5: 40-2.
  10. Witkowski S. CAD/CAM in dental technology. Quintessence Dent. Technol. 2005; 28:169-184.
  11. Bidra A.S., TaylorT.D., Agar J.R. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. J. Prosthetic Dent. 2013; 109(6): 361-6.
  12. SrinivasanM.CAD/CAM milled removable complete dentures: an in vitro evaluation of trueness. Clin. Oral Investigations. 2017; 21(6): 207-19.
  13. Rajaa M.M., Farzaneh F.F. Computer-Based Technologies in Dentistry: Types and Applications. J. Dent. Tehran Univers. Med. Sci. 2016; 13(3): 215-22.
  14. Mendonça A.F. Total CAD/CAM Supported Method for Manufacturing Removable Complete Dentures. Case Reports in Dentistry. 2016. https://www.hindawi.com/journals/crid/ 2016/1259581/. - Date of access: 15.09.2017.
  15. Наумович С.С., Разоренов А.Н. CAD/CAM системы в стоматологии: современное состояние и перспективы развития. Современная стоматология. 2016; 4 (65): 2-9.
  16. Swain M.V., Coldea A., Bilkhair A., Guess P.C. Interpenetrating network ceramic-resin composite dental restorative materials. Dental Materials. 2016; 1(32): 34-42.
  17. Alifui-Segbaya F., Williams R.J., George R. Additive Manufacturing: A Novel Method for Fabricating CobaltChromium Removable Partial Denture Frameworks. Eur. J.P.rosth. Rest. Dent. 2017; 25(2). http://www.ejprd.org/view.php?article _id=876&journal_id=114. - Date of access: 13.08.2017.
  18. Abduo J., Lyons K., Bennamoun M. Trends in Computer-Aided Manufacturing in Prosthodontics: A Review of the Available Streams. Int. J. Dent. 2014. http://dx.doi.org/ 10.1155/2014 /783948. - Date of access: 19.09.2017.
  19. Фаббер-технологии. Сайт Отличники.ru [Fabber technology. The Website Otlichnyici.ru ( in Russian). http://www.otlichnici.ru/index.php?id=212.
  20. Additive manufacturing: opportunities and constraints, Royal Academy of Engineering, May 23, 2013.
  21. Демкин В.Н., СтепановВ.А., ШадринМ.В. Системы быстрого прототипирования с лазерным сканированием. Научно-технические ведомости СПб. - ГПУ. Физико-математические науки. 2013; 3(177): 136-43.
  22. Малов И.Е., Шиганов И.Н. Основы послойного синтеза трехмерных объектов методом лазерной стереолитографии: Учеб. пособие. М.: Изд-во МГТУ им. Н.Э. Баумана.2006.
  23. Александрова В.В., Зайцева А.А., Тыжненко Д.А. Сканирование и редактирование 3D-объекта для прототипирования на 3D-принтере. Информ.-измер. и упр. системы. 2013; 11(9): 53-7.
  24. Seitz S.A Combination of Various Technologies in the Fabrication of a Removable Partial Denture - A Case Study. Texas Dent. J. 2016; 133(1): 24.
  25. Schwindling F.S., Stober T.A Сomparison of two digital techniques for the fabrication of complete removable dental prostheses: A pilot clinical study. J. Prosth. Dent. 2016; 116(5): 756-63.
  26. Зленко М.А., Попович А.А., Мутылина И.Н. Аддитивные технологии в машиностроении. Санкт-Петербург: Изд-во политех. универ. 2013; 87 - 96.
  27. Полховский Д.М. Применение компьютерных технологий в стоматологии. Часть 2. Лекции кафедры ортопедической стоматологии БГМУ. 2012. https://stomport.ru/articles/primenenie-kompyuternyh- tehnologiy-v-stomatologii.-chast-2.
  28. D-принтеры. Сайт top3d - shop.ru [3d-printers_top3dshop.ru/for-stomatology http://top3dshop. ru/for-stomatology/].
  29. Слюсар В. Фаббер-технологии. Новое средство трехмерного моделирования (рус.). Журнал «Электроника: наука, технология, бизнес». 2003; 5: 54 - 60.
  30. Mou S.H., Chai T.,Wang J.S., Shiau Y.Y.Influence of different convergence angles and tooth preparation heights on the internal adaptation of Cerec crowns. J. Prosth. Dent. 2002; 87(3): 248-55.
  31. Ozan O., Turkyilmaz I., Ersoy A.E., Mc Glumphy E.A.,Rosenstiel S.F. Clinical accuracy of 3 different types of computed tomography-derived stereolithographic surgical guides in implant placement. J. Oral Maxillofac. Surg. 2009; 67(2): 394-401.
  32. Шустова В.А., Шустов М.А. Применение 3d-технологий в ортопедической стоматологии. [https://speclit.su/image/catalog/978-5-299-00772-5/978-5-299-00772-5.pdf].
  33. Невзоров А.Ю. Полная адентия: выбор варианта лечения на основе компьютерного моделирования. Бюллетень медицинских интернет-конференций. 2013; 3(2): 230.
  34. Cohen A. Цифровые технологии будущее стоматологии. Зубной техник. 2014; 5: 40-2.
  35. Stols K. CAD/CAM в восстановительной стоматологии. Новое в стоматологии. 2008; 2: 32 - 42.

Copyright (c) 2018 Eco-Vector


 


This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies