Computation of leading edge film cooling from a CONSOLE geometry (CONverging Slot hOLE)
- Autores: Guelailia A.1, Khorsi A.1, Hamidou M.1
-
Afiliações:
- University of Sciences and Technologies
- Edição: Volume 23, Nº 1 (2016)
- Páginas: 33-42
- Seção: Article
- URL: https://journals.rcsi.science/1531-8699/article/view/216257
- DOI: https://doi.org/10.1134/S0869864316010042
- ID: 216257
Citar
Resumo
The aim of this study is to investigate the effect of mass flow rate on film cooling effectiveness and heat transfer over a gas turbine rotor blade with three staggered rows of shower-head holes which are inclined at 30° to the spanwise direction, and are normal to the streamwise direction on the blade. To improve film cooling effectiveness, the standard cylindrical holes, located on the leading edge region, are replaced with the converging slot holes (console). The ANSYS CFX has been used for this computational simulation. The turbulence is approximated by a k-ε model. Detailed film effectiveness distributions are presented for different mass flow rate. The numerical results are compared with experimental data.
Sobre autores
A. Guelailia
University of Sciences and Technologies
Autor responsável pela correspondência
Email: guelailia@yahoo.fr
Argélia, Oran
A. Khorsi
University of Sciences and Technologies
Email: guelailia@yahoo.fr
Argélia, Oran
M. Hamidou
University of Sciences and Technologies
Email: guelailia@yahoo.fr
Argélia, Oran