Enviar artigo por via de e-mail Strength of display glass
- Autores: Baikova L.G.1, Kireenko M.F.1, Pesina T.I.1, Startsev Y.K.1, Tikhonova L.V.1
-
Afiliações:
- Ioffe Physical and Technical Institute
- Edição: Volume 42, Nº 5 (2016)
- Páginas: 449-452
- Seção: Article
- URL: https://journals.rcsi.science/1087-6596/article/view/215685
- DOI: https://doi.org/10.1134/S1087659616050035
- ID: 215685
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The strength of dual-display glass surfaces 0.64 mm (Corning 1737 glass) and 0.70 mm (Eagle2000 glass) thick is measured in the initial state and after annealing. Large dispersion of the strength of the glass before and after annealing is found. It is suggested that the low values of the strength are caused by the adverse conditions of storing and handling glass samples.
Palavras-chave
Sobre autores
L. Baikova
Ioffe Physical and Technical Institute
Autor responsável pela correspondência
Email: lgbaikova@gmail.com
Rússia, St. Petersburg, 194021
M. Kireenko
Ioffe Physical and Technical Institute
Email: lgbaikova@gmail.com
Rússia, St. Petersburg, 194021
T. Pesina
Ioffe Physical and Technical Institute
Email: lgbaikova@gmail.com
Rússia, St. Petersburg, 194021
Yu. Startsev
Ioffe Physical and Technical Institute
Email: lgbaikova@gmail.com
Rússia, St. Petersburg, 194021
L. Tikhonova
Ioffe Physical and Technical Institute
Email: lgbaikova@gmail.com
Rússia, St. Petersburg, 194021
Arquivos suplementares
