Enviar artigo por via de e-mail Analysis of the Reliability of Ceramic Parts After Hydroabrasive Machining
- Autores: Kuzin V.V.1, Portnoi N.R.1, Fedorov S.Y.1, Moroz V.I.2
-
Afiliações:
- Moscow State Technological University “Stankin”
- OAO “Sandvik-MKTS”
- Edição: Volume 56, Nº 6 (2016)
- Páginas: 631-635
- Seção: Article
- URL: https://journals.rcsi.science/1083-4877/article/view/248056
- DOI: https://doi.org/10.1007/s11148-016-9902-0
- ID: 248056
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Arelationship has been experimentally established between the parameters of hydroabrasive machining on the one hand and the morphology of the working surfaces and geometry of VOK71 plates on the other hand. It is determined that hydroabrasive machining significantly improves the reliability of the plates by favorably changing the morphology of their working surfaces and cutting edge and improving the radius of curvature of the cutting edge.
Palavras-chave
Sobre autores
V. Kuzin
Moscow State Technological University “Stankin”
Autor responsável pela correspondência
Email: kuzena@post.ru
Rússia, Moscow
N. Portnoi
Moscow State Technological University “Stankin”
Email: kuzena@post.ru
Rússia, Moscow
S. Fedorov
Moscow State Technological University “Stankin”
Email: kuzena@post.ru
Rússia, Moscow
V. Moroz
OAO “Sandvik-MKTS”
Email: kuzena@post.ru
Rússia, Moscow
Arquivos suplementares
