| Шығарылым |
Атауы |
Файл |
| Том 58, № 5 (2018) |
A Method for the Evaluation of the Required Flow Rate of Aspirated Air for the Reloading of Loose Materials in Telescopic Plants |
|
|
Averkova O., Logachev I., Logachev K., Kryukov I.
|
| Том 58, № 3 (2017) |
A Method of Additive Aerodynamic Calculation of the Friction Gear Classification Block |
|
|
Makarov V., Potapov V., Davydov S., Makarov N.
|
| Том 59, № 1 (2018) |
A Study of 3D Geometric Shapes, Optimum dimensions, and Designs for Refractory Products for Improved Unit Durability |
|
|
Slovikovskii V., Gulyaeva A.
|
| Том 57, № 5 (2017) |
A Technique of Calculating Heat Losses Through the Multi-Layer Solid – Gas Lining of Heating Furnaces |
|
|
Pribytkov I., Terekhova A.
|
| Том 60, № 3 (2019) |
Acidic Methods of Alumina Production (Review) |
|
|
Kashcheev I., Zemlyanoi K., Stepanova K.
|
| Том 60, № 1 (2019) |
Aluminum Oxide and Alumina Ceramics (review). Part 1. Properties of Al2O3 and Commercial Production of Dispersed Al2O3 |
|
|
Abyzov A.
|
| Том 60, № 1 (2019) |
Aluminum Oxide and Alumina Ceramics (Review). Part 2. Foreign Manufacturers of Alumina Ceramics. Technologies and Research in the Field of Alumina Ceramics1 |
|
|
Abyzov A.
|
| Том 57, № 1 (2016) |
Alumo-Yttrium Garnet Crucibles Made by Slip Casting for Work with High-Purity Powders |
|
|
Trifonov Y., Dosovitskii G., Kuznetsova D., Tarasovskii V.
|
| Том 60, № 4 (2019) |
Analysis of Occurrence, Properties, and Methods of Minimizing Production Defects in Ceramic Composites with an Sic-Matrix Prepared by Liquid-Phase Siliciding |
|
|
Garshin A., Kulik V., Nilov A.
|
| Том 57, № 3 (2016) |
Analysis of Operation of a Steel-Pouring Ladle–Tundish System for a Section CBCM and Improved Refractory Structures of the Tundish Receiving Chamber |
|
|
Vdovin K., Tochilkin V., Tochilkin V.
|
| Том 57, № 1 (2016) |
Analysis of Oxide-Carbide Ceramic Surface Layer Stress-Strained State with Jet-Abrasive Treatment |
|
|
Kuzin V., Fedorov S., Portnoi N.
|
| Том 60, № 1 (2019) |
Analysis of the Process of Casting of the Metal by an Open Stream and the Design of the Equipment of Receiving Chambers of the Tundish of CCM |
|
|
Vdovin K., Tochilkin V., Filatova O., Tochilkin V.
|
| Том 59, № 1 (2018) |
Analysis of the Process of Metal Casting and the Structure of Refractory Equipment of the “Tundish Ladle – Submerged Nozzle – Crystallizer” System of a Section CBCM |
|
|
Tochilkin V., Filatova O., Umnov V., Tochilkin V.
|
| Том 56, № 6 (2016) |
Analysis of the Reliability of Ceramic Parts After Hydroabrasive Machining |
|
|
Kuzin V., Portnoi N., Fedorov S., Moroz V.
|
| Том 58, № 1 (2017) |
Analytical Model of Absorption-Reflection Properties of Vermiculite Under Thermal Radiation Conditions |
|
|
Zvezdin A., Bryanskikh T., Nizhegorodov A.
|
| Том 60, № 3 (2019) |
Application Method for Protective and Electrical Insulating Ceramic Coatings by Microarc Oxidation Under Excess Pressure Conditions |
|
|
Markov M., Farmakovskii B., Krasikov A., Bykova A., Perevislov S., Belyakov A.
|
| Том 56, № 5 (2016) |
Aspects of the Thermal Performance of a Cupola with a Closed Top for Remelting Mineral-Bearing Raw Materials |
|
|
Matyukhin V., Matyukhin O., Matyukhina A.
|
| Том 59, № 4 (2018) |
Assignment of the Abrasive-Jet Machining Mode of Si3N4-Ceramic Components Considering the Stress State of Various Surface-Layer Phases |
|
|
Kuzin V., Fedorov M., Volosova M.
|
| Том 56, № 6 (2016) |
Beryllium Oxide Powder Microstructure During Production Processing |
|
|
Kiiko V.
|
| Том 56, № 6 (2016) |
Boundary Conditions for Designing the Lining of a Glass-Founding Furnace with Innovative Parameters to Improve Technical Efficiency |
|
|
Dzyuzer V., Shvydkii V.
|
| Том 57, № 1 (2016) |
Capturing Nanoparticles in Alumina Production |
|
|
Davydov S., Apakashev R., Koryukov V.
|
| Том 57, № 3 (2016) |
Carbide Formation at a Carbon-Graphite Lining Cathode Surface Wettable with Aluminum |
|
|
Gorlanov E., Bazhin V., Fedorov S.
|
| Том 58, № 2 (2017) |
Carbide Synthesis Resulting from Mechanical Activation of Titanium and Various Carbon Components |
|
|
Reva V., Yagofarov V., Filatenkov A., Gulevskii D., Kuryavyi V., Mansurov Y.
|
| Том 60, № 1 (2019) |
Carbon Nanotubes for the Synthesis of Ceramic Matrix Composites (Cleaning, Dispersion, Surface Modification) (Review) |
|
|
Belyakov A.
|
| Том 57, № 1 (2016) |
Ceramic Material for Making Heat-Resistant Products |
|
|
Baranova T., Valiakhmetov S.
|
| Нәтижелер 514 - 1/25 |
1 2 3 4 5 6 7 8 9 10 > >> |
