Email this article Lining of the Rotary Kilns for Petroleum Coke Calcination
- Authors: Lapaev I.I.1, Sorokin V.V.2, Goloskin S.E.1, Orlov A.V.3
-
Affiliations:
- Limited Liability Company “RUSAL Unified Company, Engineering and Technology Center”
- CJSC “RUSAL Global Management B. V.”
- Limited Liability Research and Production Company “Aliter-Axi”
- Issue: Vol 60, No 1 (2019)
- Pages: 1-5
- Section: Refractories in Heating Units
- URL: https://journals.rcsi.science/1083-4877/article/view/249210
- DOI: https://doi.org/10.1007/s11148-019-00299-w
- ID: 249210
Cite item
Open Access
Access granted
Subscription Access
Abstract
The paper provides a brief description of the technological process and design of the rotary kilns for petroleum coke KEP-1 and KEP-2 calcination, as well as specifies the lining requirements for some parts of such kilns. The lining bricklaying specifics and main techniques with respect to rotary kilns (including foreign designs) are demonstrated. A feasible lining option for rotary kilns measuring 3 m in diameter and 45 m in length is described. Lining design and modern materials are proposed for a calcination kiln used in the production of calcined petroleum coke KEP-2.
About the authors
I. I. Lapaev
Limited Liability Company “RUSAL Unified Company, Engineering and Technology Center”
Author for correspondence.
Email: Igor.Lapaev@rusal.com
Russian Federation, Krasnoyarsk
V. V. Sorokin
CJSC “RUSAL Global Management B. V.”
Email: Igor.Lapaev@rusal.com
Russian Federation, Moscow
S. E. Goloskin
Limited Liability Company “RUSAL Unified Company, Engineering and Technology Center”
Email: Igor.Lapaev@rusal.com
Russian Federation, Krasnoyarsk
A. V. Orlov
Limited Liability Research and Production Company “Aliter-Axi”
Email: Igor.Lapaev@rusal.com
Russian Federation, St. Petersburg
Supplementary files
