Email this article Production Process Planning for Preparing Si3N4-Ceramic Objects Taking Account of Edge Defectiveness
- Authors: Kuzin V.V.1, Fedorov S.Y.1, Grigor’ev S.N.1
-
Affiliations:
- FGBOU VO Moscow State Technological University Stankin
- Issue: Vol 58, No 5 (2018)
- Pages: 562-565
- Section: Article
- URL: https://journals.rcsi.science/1083-4877/article/view/248919
- DOI: https://doi.org/10.1007/s11148-018-0145-0
- ID: 248919
Cite item
Open Access
Access granted
Subscription Access
Abstract
Features of Si3N4-ceramic specimen edge morphology formation with diamond surface grinding are studied, and forms of chipping and geometric parameters are determined. On the basis of correlation revealed for grinding depth, horizontal and longitudinal feed with geometric parameters of chipping, a requirement is determined for planning a production process for manufacturing components and tools of Si3N4-ceramic taking account of edge defectiveness.
About the authors
V. V. Kuzin
FGBOU VO Moscow State Technological University Stankin
Author for correspondence.
Email: kyzena@post.ru
Russian Federation, Moscow
S. Yu. Fedorov
FGBOU VO Moscow State Technological University Stankin
Email: kyzena@post.ru
Russian Federation, Moscow
S. N. Grigor’ev
FGBOU VO Moscow State Technological University Stankin
Email: kyzena@post.ru
Russian Federation, Moscow
Supplementary files
