Porous SHS-Materials Based on Iron Oxide and Aluminum with Additions of Alloying Elements
- Authors: Kolomeets M.A.1, Maetskii A.V.2, Novoselova T.V.3, Tubalov N.P.2, Yakovleva O.V.4
-
Affiliations:
- FGBOU VO Altai State medical University
- FGBOU VO I. I. Polzunov Altai State Technical University
- Polytechnic Institute, Branch of FGBOU VO Don State Technical University
- D. Serikbaev East-Kazakhstan State Technical University
- Issue: Vol 58, No 3 (2017)
- Pages: 293-298
- Section: Scientific Research and Development
- URL: https://journals.rcsi.science/1083-4877/article/view/248886
- DOI: https://doi.org/10.1007/s11148-017-0099-7
- ID: 248886
Cite item
Abstract
An optimum charge composition is developed for preparing porous permeable cermet SHS-materials with prescribed operating properties for cleaning exhaust gases of industrial installations and internal combustion engines. Physicomechanical properties of the materials obtained are determined with a different content of charge components and the range of vibration frequency is established suitable for material operation as filters. It is shown that addition of 0.5 – 1.5 wt.% of alloying elements to a charge increases SHS-material mechanical strength and shock resistance.
About the authors
M. A. Kolomeets
FGBOU VO Altai State medical University
Email: maetscky@yandex.ru
Russian Federation, Barnaul
A. V. Maetskii
FGBOU VO I. I. Polzunov Altai State Technical University
Author for correspondence.
Email: maetscky@yandex.ru
Russian Federation, Barnaul
T. V. Novoselova
Polytechnic Institute, Branch of FGBOU VO Don State Technical University
Email: maetscky@yandex.ru
Russian Federation, Taganrog
N. P. Tubalov
FGBOU VO I. I. Polzunov Altai State Technical University
Email: maetscky@yandex.ru
Russian Federation, Barnaul
O. V. Yakovleva
D. Serikbaev East-Kazakhstan State Technical University
Email: maetscky@yandex.ru
Kazakhstan, Ust’-Kamenogorsk
Supplementary files
