Oxidation-Resistant Nano-Reinforced PC-refractories of Modified Phenolformaldehyde Resin. Part 2. Modification of Phenolformaldehyde Resins with Silicon Alkoxide Sols 1

G. D. Semchenko; O. N. Borisenko; V. V. Povshuk; D. A. Brazhnik; L. A. Angolenko; Yu. V. Permyakov; O. A. Vasyuk

doi:10.1007/s11148-017-0031-1

Oxidation-Resistant Nano-Reinforced PC-refractories of Modified Phenolformaldehyde Resin. Part 2. Modification of Phenolformaldehyde Resins with Silicon Alkoxide Sols¹

Authors: Semchenko G.D.¹, Borisenko O.N.², Povshuk V.V.¹, Brazhnik D.A.¹, Angolenko L.A.¹, Permyakov Y.V.¹, Vasyuk O.A.¹
Affiliations:
1. National Technical University Kharkov Polytechnic Institute
2. Kharkov National Economic University
Issue: Vol 57, No 6 (2017)
Pages: 605-608
Section: Article
URL: https://journals.rcsi.science/1083-4877/article/view/248639
DOI: https://doi.org/10.1007/s11148-017-0031-1
ID: 248639

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract

Coking of phenolformaldehyde resins (PFRs) modified with various silicon-alkoxide sols produced structurally varied carbon binders with cavities filled by entrained sols, depending on the structures of the silicon-alkoxide hydrolysis products. The physicomechanical properties improved if PFRs modified with silicon-alkoxide sols were used. Sols with the stoichiometric amount of water hydrolyzed the silicon alkoxide more effectively.