Email this article Preparation of Porous Periclase Ceramic
- Authors: Leonov V.G.1, Afonina G.A.1, Demkin V.N.2
-
Affiliations:
- New Moscow Institute (Branch) FGBOU VPO D I. Mendelev Russian Chemical Technology University
- OOO Poliplast
- Issue: Vol 56, No 5 (2016)
- Pages: 486-489
- Section: Article
- URL: https://journals.rcsi.science/1083-4877/article/view/247923
- DOI: https://doi.org/10.1007/s11148-016-9874-0
- ID: 247923
Cite item
Open Access
Access granted
Subscription Access
Abstract
Methods are compared for preparing porous periclase ceramic. The filler used is electromelted periclase and porous periclase granules, and the additives for burning off are sawdust and urea granules. The effect of filler grain size composition, form and amount of sintering, and burnt-off additive on ceramic porosity, strength, and gas permeability are studied.
About the authors
V. G. Leonov
New Moscow Institute (Branch) FGBOU VPO D I. Mendelev Russian Chemical Technology University
Email: afonina.galina@gmail.ru
Russian Federation, Novomoskovsk, Tula Region
G. A. Afonina
New Moscow Institute (Branch) FGBOU VPO D I. Mendelev Russian Chemical Technology University
Author for correspondence.
Email: afonina.galina@gmail.ru
Russian Federation, Novomoskovsk, Tula Region
V. N. Demkin
OOO Poliplast
Email: afonina.galina@gmail.ru
Russian Federation, Novomoskovsk, Tula Region
Supplementary files
