Email this article Modification of Natural Rubber with Poly(diallyldimethylammonium chloride) and Polyvinyl Chloride
- Authors: Dao F.K.1,2, Gaidadin A.N.1, Gorkovenko D.A.1, Navrotsky V.A.1
-
Affiliations:
- Volgograd State Technical University
- Institute of Propellant and Explosives
- Issue: Vol 92, No 6 (2019)
- Pages: 759-766
- Section: Macromolecular Compounds and Polymeric Materials
- URL: https://journals.rcsi.science/1070-4272/article/view/216543
- DOI: https://doi.org/10.1134/S1070427219060053
- ID: 216543
Cite item
Open Access
Access granted
Subscription Access
Abstract
The modification of natural rubber with poly(diallyldimethylammonium chloride) and polyvinyl chloride by mixing latexes was studied. It was established that coagulation with polyelectrolyte contributes to preservation of non-rubber components and reduction of the Mooney rubber viscosity, and the introduction of polyvinyl chloride increases the oil and gasoline resistance of the compositions. The revealed effects are explained by the influence of the natural rubber microstructure and polyvinyl chloride on the macroscopic properties of their blends.
About the authors
Fam Kim Dao
Volgograd State Technical University; Institute of Propellant and Explosives
Author for correspondence.
Email: phamkimdao@gmail.com
Russian Federation, Volgograd, 400005; Hanoi
A. N. Gaidadin
Volgograd State Technical University
Email: phamkimdao@gmail.com
Russian Federation, Volgograd, 400005
D. A. Gorkovenko
Volgograd State Technical University
Email: phamkimdao@gmail.com
Russian Federation, Volgograd, 400005
V. A. Navrotsky
Volgograd State Technical University
Email: phamkimdao@gmail.com
Russian Federation, Volgograd, 400005
Supplementary files
