Modification of Natural Rubber with Poly(diallyldimethylammonium chloride) and Polyvinyl Chloride
- Авторы: Dao F.K.1,2, Gaidadin A.N.1, Gorkovenko D.A.1, Navrotsky V.A.1
-
Учреждения:
- Volgograd State Technical University
- Institute of Propellant and Explosives
- Выпуск: Том 92, № 6 (2019)
- Страницы: 759-766
- Раздел: Macromolecular Compounds and Polymeric Materials
- URL: https://journals.rcsi.science/1070-4272/article/view/216543
- DOI: https://doi.org/10.1134/S1070427219060053
- ID: 216543
Цитировать
Аннотация
The modification of natural rubber with poly(diallyldimethylammonium chloride) and polyvinyl chloride by mixing latexes was studied. It was established that coagulation with polyelectrolyte contributes to preservation of non-rubber components and reduction of the Mooney rubber viscosity, and the introduction of polyvinyl chloride increases the oil and gasoline resistance of the compositions. The revealed effects are explained by the influence of the natural rubber microstructure and polyvinyl chloride on the macroscopic properties of their blends.
Об авторах
Fam Dao
Volgograd State Technical University; Institute of Propellant and Explosives
Автор, ответственный за переписку.
Email: phamkimdao@gmail.com
Россия, Volgograd, 400005; Hanoi
A. Gaidadin
Volgograd State Technical University
Email: phamkimdao@gmail.com
Россия, Volgograd, 400005
D. Gorkovenko
Volgograd State Technical University
Email: phamkimdao@gmail.com
Россия, Volgograd, 400005
V. Navrotsky
Volgograd State Technical University
Email: phamkimdao@gmail.com
Россия, Volgograd, 400005
Дополнительные файлы
