Отправить статью по E-mail Effect of the Free Quenching on Mechanical and Thermomechanical Properties of ABS
- Авторы: Bencid A.1,2, Rouabah F.2, Fois M.3, Djidjelli H.2
-
Учреждения:
- Laboratoire des matériaux polymères avancés
- Laboratoire de Physico-chimie des Hauts Polymères
- Université Paris-Est Créteil Val de Marne, CERTES
- Выпуск: Том 90, № 12 (2017)
- Страницы: 2009-2015
- Раздел: Various Technological Processes
- URL: https://journals.rcsi.science/1070-4272/article/view/215498
- DOI: https://doi.org/10.1134/S1070427217120175
- ID: 215498
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
The purpose of this work was to investigate the influence of thermal annealing and quenching on mechanical, and thermomechanical properties of acrylonitrile butadiene styrene (ABS). The free quenching was applied over a temperature range starting from a temperature slightly above Tg to temperatures below 0°C. The improvement of the impact strength is linked to the cavitation of the rubber particles close to the samples surface. The existence of a relaxation mode located around–10°C may participate to the relaxation of the residual stresses when the sample is quenched under 0°C, this phenomenon would promote cavitation.
Об авторах
A. Bencid
Laboratoire des matériaux polymères avancés; Laboratoire de Physico-chimie des Hauts Polymères
Автор, ответственный за переписку.
Email: abdeslambencid@yahoo.com
Алжир, Bejaia, 06000; Sétif, 19000
F. Rouabah
Laboratoire de Physico-chimie des Hauts Polymères
Email: abdeslambencid@yahoo.com
Алжир, Sétif, 19000
M. Fois
Université Paris-Est Créteil Val de Marne, CERTES
Email: abdeslambencid@yahoo.com
Франция, 61 Av. du Général de Gaulle, Créteil Cedex, 94010
H. Djidjelli
Laboratoire de Physico-chimie des Hauts Polymères
Email: abdeslambencid@yahoo.com
Алжир, Sétif, 19000
Дополнительные файлы
