Enviar artigo por via de e-mail Software for Simulating the Surface Wear of Tools
- Autores: Muratov K.R.1, Ablyaz T.R.1, Gashev E.A.1, Rykunov A.N.2
-
Afiliações:
- Perm National Research Polytechnic University
- Federal State-Financed Educational Institution of High Professional Education “P. A. Solovyov Rybinsk State Aviation Technical University”
- Edição: Volume 39, Nº 10 (2019)
- Páginas: 869-871
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227823
- DOI: https://doi.org/10.3103/S1068798X19100174
- ID: 227823
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Software for recording machining tracks in abrasive lapping is described. The software permits prediction of the shape and magnitude of the tool’s surface wear at the stage of process design, on the basis of the dimensions of the workpiece and the lap, their relative velocity, and the machining trajectory.
Palavras-chave
Sobre autores
K. Muratov
Perm National Research Polytechnic University
Autor responsável pela correspondência
Email: Karimur_80@mail.ru
Rússia, Perm
T. Ablyaz
Perm National Research Polytechnic University
Autor responsável pela correspondência
Email: unpl_mtf@pstu.ru
Rússia, Perm
E. Gashev
Perm National Research Polytechnic University
Email: rykunov2007@yandex.ru
Rússia, Perm
A. Rykunov
Federal State-Financed Educational Institution of High Professional Education“P. A. Solovyov Rybinsk State Aviation Technical University”
Autor responsável pela correspondência
Email: rykunov2007@yandex.ru
Rússia, Rybinsk, 152934
Arquivos suplementares
