Email this article Software for Simulating the Surface Wear of Tools
- Authors: Muratov K.R.1, Ablyaz T.R.1, Gashev E.A.1, Rykunov A.N.2
-
Affiliations:
- Perm National Research Polytechnic University
- Federal State-Financed Educational Institution of High Professional Education “P. A. Solovyov Rybinsk State Aviation Technical University”
- Issue: Vol 39, No 10 (2019)
- Pages: 869-871
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227823
- DOI: https://doi.org/10.3103/S1068798X19100174
- ID: 227823
Cite item
Open Access
Access granted
Subscription Access
Abstract
Software for recording machining tracks in abrasive lapping is described. The software permits prediction of the shape and magnitude of the tool’s surface wear at the stage of process design, on the basis of the dimensions of the workpiece and the lap, their relative velocity, and the machining trajectory.
Keywords
About the authors
K. R. Muratov
Perm National Research Polytechnic University
Author for correspondence.
Email: Karimur_80@mail.ru
Russian Federation, Perm
T. R. Ablyaz
Perm National Research Polytechnic University
Author for correspondence.
Email: unpl_mtf@pstu.ru
Russian Federation, Perm
E. A. Gashev
Perm National Research Polytechnic University
Email: rykunov2007@yandex.ru
Russian Federation, Perm
A. N. Rykunov
Federal State-Financed Educational Institution of High Professional Education“P. A. Solovyov Rybinsk State Aviation Technical University”
Author for correspondence.
Email: rykunov2007@yandex.ru
Russian Federation, Rybinsk, 152934
Supplementary files
