Email this article Finishing with Free and Bound Abrasive
- Authors: Muratov K.R.1, Gashev E.A.1, Ablyaz T.R.1
-
Affiliations:
- Perm National Research Polytechnic University
- Issue: Vol 39, No 10 (2019)
- Pages: 872-874
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227826
- DOI: https://doi.org/10.3103/S1068798X19100186
- ID: 227826
Cite item
Open Access
Access granted
Subscription Access
Abstract
Abrasive finishing of a single crystal by means of free and bound abrasive is compared in conditions with forced and free workpiece rotation. Experimental data show that the influence of forced and free workpiece rotation is different for finishing by means of free and bound abrasive. In machining by bound abrasive with forced rotation, the cutting rate and productivity are 25% higher, on average, than with free rotation.
About the authors
K. R. Muratov
Perm National Research Polytechnic University
Author for correspondence.
Email: Karimur_80@mail.ru
Russian Federation, Perm
E. A. Gashev
Perm National Research Polytechnic University
Author for correspondence.
Email: unpl_mtf@pstu.ru
Russian Federation, Perm
T. R. Ablyaz
Perm National Research Polytechnic University
Author for correspondence.
Email: lowrider11-13-11@mail.ru
Russian Federation, Perm
Supplementary files
